https://www.techtool.com/products/kennametal-harvi-i-te-square-end-end-mill-weldon-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100149681-original-pixels.png?v=1792975425 Kennametal HARVI I TE Square End Mill — Weldon Shank — Inch Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-square-end-end-mill-necked-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-necked-square-plain-manufacturer.png?v=1792929822 Kennametal HARVI I TE Square End Mill — Necked — Plain Shank — Metric Kennametal HARVI I TE square-end, necked, plain shank end mill — representative manufacturer family image; selected configuration dimensions vary. https://www.techtool.com/products/kennametal-harvi-i-te-square-end-end-mill-necked-weldon-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100161219-original-pixels.png?v=1792975431 Kennametal HARVI I TE Square End Mill — Necked — Weldon Shank — Metric Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-square-end-end-mill-short-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100160574-original-pixels.png?v=1792975995 Kennametal HARVI I TE Square End Mill — Short — Plain Shank — Metric Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-square-end-end-mill-short-weldon-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-101094871-original-pixels.png?v=1792976002 Kennametal HARVI I TE Square End Mill — Short — Weldon Shank — Metric Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-corner-radius-end-mill-necked-plain-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-necked-radius-plain-manufacturer.png?v=1792929816 Kennametal HARVI I TE Corner Radius End Mill — Necked — Plain Shank — Inch Kennametal HARVI I TE corner-radius, necked, plain shank end mill — representative manufacturer family image; selected configuration dimensions vary. https://www.techtool.com/products/kennametal-harvi-i-te-corner-radius-end-mill-necked-weldon-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100161219-original-pixels.png?v=1792975431 Kennametal HARVI I TE Corner Radius End Mill — Necked — Weldon Shank — Inch Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-ball-nose-end-mill-regular-weldon-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-101403845-original-pixels.png?v=1792976008 Kennametal HARVI I TE Ball Nose End Mill — Regular — Weldon Shank — Inch Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-ball-nose-end-mill-regular-plain-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100663836-original-pixels.png?v=1792976014 Kennametal HARVI I TE Ball Nose End Mill — Regular — Plain Shank — Inch Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-ball-nose-end-mill-long-plain-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100663835-original-pixels.png?v=1792978648 Kennametal HARVI I TE Ball Nose End Mill — Long — Plain Shank — Inch Kennametal HARVI I TE ball nose end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-ball-nose-end-mill-long-weldon-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-101403844-original-pixels.png?v=1792976020 Kennametal HARVI I TE Ball Nose End Mill — Long — Weldon Shank — Inch Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-ball-nose-end-mill-necked-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100663834-original-pixels.png?v=1792976026 Kennametal HARVI I TE Ball Nose End Mill — Necked — Plain Shank — Metric Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-ball-nose-end-mill-long-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100663835-original-pixels.png?v=1792978648 Kennametal HARVI I TE Ball Nose End Mill — Long — Plain Shank — Metric Kennametal HARVI I TE ball nose end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-corner-radius-end-mill-extended-neck-safe-lock-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100969182-original-pixels.png?v=1792976035 Kennametal HARVI I TE Corner Radius End Mill — Extended Neck — Safe-Lock Shank — Metric Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-corner-radius-end-mill-extended-neck-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100969183-original-pixels.png?v=1792976042 Kennametal HARVI I TE Corner Radius End Mill — Extended Neck — Plain Shank — Metric Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-corner-radius-end-mill-extended-neck-weldon-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-i-te-100969181-original-pixels.png?v=1792976050 Kennametal HARVI I TE Corner Radius End Mill — Extended Neck — Weldon Shank — Metric Kennametal HARVI I TE end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-harvi-i-te-corner-radius-end-mill-safe-lock-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-harvi-safe-lock-illustrative-v1.png?v=1793023448 Kennametal HARVI I TE Corner Radius End Mill — Safe-Lock Shank — Inch Illustrative rendering — Kennametal HARVI I TE four-flute corner-radius end mill with Safe-Lock shank, based on manufacturer drawing; not a product photograph https://www.techtool.com/products/kennametal-gomill-pro-corner-radius-end-mill-necked-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424215-pixel-preserved.png?v=1792974168 Kennametal GOmill PRO Corner Radius End Mill — Necked — Plain Shank — Metric Kennametal GOmill PRO corner radius end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-square-end-end-mill-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424209-pixel-preserved.png?v=1792974175 Kennametal GOmill PRO Square End Mill — Plain Shank — Metric Kennametal GOmill PRO square end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-chamfered-end-mill-necked-weldon-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424221-pixel-preserved.png?v=1792974182 Kennametal GOmill PRO Chamfered End Mill — Necked — Weldon Shank — Metric Kennametal GOmill PRO chamfered end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-chamfered-end-mill-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424197-pixel-preserved.png?v=1792974215 Kennametal GOmill PRO Chamfered End Mill — Plain Shank — Metric Kennametal GOmill PRO chamfered end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-chamfered-end-mill-weldon-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424200-pixel-preserved.png?v=1792974188 Kennametal GOmill PRO Chamfered End Mill — Weldon Shank — Metric Kennametal GOmill PRO chamfered end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-ball-nose-end-mill-necked-weldon-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-pro-7231277-s-manufacturer-native-alpha.png?v=1792923701 Kennametal GOmill PRO Ball Nose End Mill — Necked — Weldon Shank — Metric Kennametal GOmill PRO ball nose necked end mill with Weldon shank — manufacturer photograph of material 7231277; representative family image, exact configuration dimensions vary. https://www.techtool.com/products/kennametal-gomill-pro-ball-nose-end-mill-necked-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424223-pixel-preserved.png?v=1792974209 Kennametal GOmill PRO Ball Nose End Mill — Necked — Plain Shank — Metric Kennametal GOmill PRO ball nose end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-corner-radius-end-mill-weldon-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424194-pixel-preserved.png?v=1792974223 Kennametal GOmill PRO Corner Radius End Mill — Weldon Shank — Metric Kennametal GOmill PRO corner radius end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-corner-radius-end-mill-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424191-pixel-preserved.png?v=1792974230 Kennametal GOmill PRO Corner Radius End Mill — Plain Shank — Metric Kennametal GOmill PRO corner radius end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-chamfered-end-mill-necked-plain-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109490955-pixel-preserved.png?v=1792974260 Kennametal GOmill PRO Chamfered End Mill — Necked — Plain Shank — Metric Kennametal GOmill PRO chamfered end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-corner-radius-end-mill-necked-weldon-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109444033-pixel-preserved.png?v=1792974253 Kennametal GOmill PRO Corner Radius End Mill — Necked — Weldon Shank — Inch Kennametal GOmill PRO corner radius end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-corner-radius-end-mill-plain-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424191-pixel-preserved.png?v=1792974230 Kennametal GOmill PRO Corner Radius End Mill — Plain Shank — Inch Kennametal GOmill PRO corner radius end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-corner-radius-end-mill-weldon-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424194-pixel-preserved.png?v=1792974223 Kennametal GOmill PRO Corner Radius End Mill — Weldon Shank — Inch Kennametal GOmill PRO corner radius end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-corner-radius-end-mill-necked-plain-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424215-pixel-preserved.png?v=1792974168 Kennametal GOmill PRO Corner Radius End Mill — Necked — Plain Shank — Inch Kennametal GOmill PRO corner radius end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-square-end-end-mill-weldon-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424212-pixel-preserved.png?v=1792974269 Kennametal GOmill PRO Square End Mill — Weldon Shank — Inch Kennametal GOmill PRO square end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-square-end-end-mill-plain-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424209-pixel-preserved.png?v=1792974175 Kennametal GOmill PRO Square End Mill — Plain Shank — Inch Kennametal GOmill PRO square end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-ball-nose-end-mill-plain-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109444031-pixel-preserved.png?v=1792974299 Kennametal GOmill PRO Ball Nose End Mill — Plain Shank — Inch Kennametal GOmill PRO ball nose end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-ball-nose-end-mill-weldon-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109444029-pixel-preserved.png?v=1792974276 Kennametal GOmill PRO Ball Nose End Mill — Weldon Shank — Inch Kennametal GOmill PRO ball nose end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-chamfered-end-mill-weldon-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424200-pixel-preserved.png?v=1792974188 Kennametal GOmill PRO Chamfered End Mill — Weldon Shank — Inch Kennametal GOmill PRO chamfered end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-chamfered-end-mill-plain-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109424197-pixel-preserved.png?v=1792974215 Kennametal GOmill PRO Chamfered End Mill — Plain Shank — Inch Kennametal GOmill PRO chamfered end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-gomill-pro-corner-radius-end-mill-necked-weldon-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-gomill-109490956-pixel-preserved.png?v=1792974305 Kennametal GOmill PRO Corner Radius End Mill — Necked — Weldon Shank — Metric Kennametal GOmill PRO corner radius end mill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/widia-top-cut-4-4xd-indexable-drill-body-slr-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-drill-101114474-original-pixels.png?v=1792976520 WIDIA Top Cut 4 4xD Indexable Drill Body — SLR Shank — Inch WIDIA Top Cut 4 drill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/widia-top-cut-4-5xd-indexable-drill-body-slr-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-drill-101114474-original-pixels.png?v=1792976520 WIDIA Top Cut 4 5xD Indexable Drill Body — SLR Shank — Inch WIDIA Top Cut 4 drill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/widia-top-cut-4-3xd-indexable-drill-body-slr-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-top-cut4-3xd-manufacturer-native-cutout.png?v=1792933401 WIDIA Top Cut 4 3xD Indexable Drill Body — SLR Shank — Inch WIDIA Top Cut 4 3xD SLR drill body — representative manufacturer family image; dimensions vary by selected configuration https://www.techtool.com/products/widia-top-cut-4-2xd-indexable-drill-body-slr-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-drill-101221980-original-pixels.png?v=1792976534 WIDIA Top Cut 4 2xD Indexable Drill Body — SLR Shank — Inch WIDIA Top Cut 4 drill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/widia-top-cut-4-5xd-indexable-drill-body-slr-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-drill-101114474-original-pixels.png?v=1792976520 WIDIA Top Cut 4 5xD Indexable Drill Body — SLR Shank — Metric WIDIA Top Cut 4 drill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/widia-top-cut-4-4xd-indexable-drill-body-slr-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-drill-101221979-original-pixels.png?v=1792976527 WIDIA Top Cut 4 4xD Indexable Drill Body — SLR Shank — Metric WIDIA Top Cut 4 drill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/widia-top-cut-4-2xd-indexable-drill-body-slr-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-drill-101221980-original-pixels.png?v=1792976534 WIDIA Top Cut 4 2xD Indexable Drill Body — SLR Shank — Metric WIDIA Top Cut 4 drill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/widia-top-cut-4-3xd-indexable-drill-body-slr-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-drill-101221978-original-pixels.png?v=1792976542 WIDIA Top Cut 4 3xD Indexable Drill Body — SLR Shank — Metric WIDIA Top Cut 4 drill — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/widia-top-cut-4-v34-periphery-drilling-inserts 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-top-cut-4-v34-periphery-109451653-pixel-preserved.png?v=1792969222 WIDIA Top Cut 4 V34 Periphery Drilling Inserts WIDIA Top Cut 4 V34 periphery drilling insert — representative manufacturer family image; exact configuration dimensions and grade vary. https://www.techtool.com/products/widia-top-cut-4-v34-center-drilling-inserts 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-top-cut-4-v34-center-109451650-pixel-preserved.png?v=1792969242 WIDIA Top Cut 4 V34 Center Drilling Inserts WIDIA Top Cut 4 v34 center drilling insert — representative manufacturer family image; exact configuration dimensions and grade vary. https://www.techtool.com/products/widia-top-cut-4-v36-periphery-drilling-inserts 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-top-cut-4-v36-periphery-109451654-pixel-preserved.png?v=1792969248 WIDIA Top Cut 4 V36 Periphery Drilling Inserts WIDIA Top Cut 4 v36 periphery drilling insert — representative manufacturer family image; exact configuration dimensions and grade vary. https://www.techtool.com/products/widia-top-cut-4-v36-center-drilling-inserts 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-top-cut-4-v36-center-109451651-pixel-preserved.png?v=1792969274 WIDIA Top Cut 4 V36 Center Drilling Inserts WIDIA Top Cut 4 V36 center drilling insert — representative manufacturer family image; exact configuration dimensions and grade vary. https://www.techtool.com/products/widia-top-cut-4-v38-periphery-drilling-inserts 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-top-cut-4-v38-periphery-109451656-pixel-preserved.png?v=1792969288 WIDIA Top Cut 4 V38 Periphery Drilling Inserts WIDIA Top Cut 4 V38 periphery drilling insert — representative manufacturer family image; exact configuration dimensions and grade vary. https://www.techtool.com/products/widia-top-cut-4-v38-center-drilling-inserts 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-top-cut-4-v38-center-109451657-pixel-preserved.png?v=1792969255 WIDIA Top Cut 4 V38 Center Drilling Inserts WIDIA Top Cut 4 v38 center drilling insert — representative manufacturer family image; exact configuration dimensions and grade vary. https://www.techtool.com/products/widia-top-cut-4-du-center-drilling-inserts 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/widia-top-cut-4-du-center-109451659-pixel-preserved.png?v=1792969280 WIDIA Top Cut 4 DU Center Drilling Inserts WIDIA Top Cut 4 DU center drilling insert — representative manufacturer family image; exact configuration dimensions and grade vary. https://www.techtool.com/products/kennametal-kentip-fs-hpg-modular-drill-tips-steel 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-ktfs-hpg-x2-manufacturer-native-alpha.png?v=1792923716 Kennametal KenTIP FS HPG Modular Drill Tips — Steel Kennametal KenTIP FS HPG modular drill tip — representative manufacturer geometry image; refer to the selected material number for exact dimensions and grade. https://www.techtool.com/products/kennametal-kentip-fs-hpl-modular-drill-tips-stainless-steel 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-ktfs-hpl-x2-manufacturer-native-alpha.png?v=1792923739 Kennametal KenTIP FS HPL Modular Drill Tips — Stainless Steel Kennametal KenTIP FS HPL modular drill tip — representative manufacturer geometry image; refer to the selected material number for exact dimensions and grade. https://www.techtool.com/products/kennametal-kentip-fs-hpc-modular-drill-tips-cast-iron 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-ktfs-hpc-d16-rev04-rm-x2-manufacturer-native-alpha.png?v=1792923724 Kennametal KenTIP FS HPC Modular Drill Tips — Cast Iron Kennametal KenTIP FS HPC modular drill tip — representative manufacturer geometry image; refer to the selected material number for exact dimensions and grade. https://www.techtool.com/products/kennametal-kentip-fs-8xd-modular-drill-body-ss-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685757-original-pixels.png?v=1792977011 Kennametal KenTIP FS 8xD Modular Drill Body — SS Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-5xd-modular-drill-body-ss-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685753-original-pixels.png?v=1792977024 Kennametal KenTIP FS 5xD Modular Drill Body — SS Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-3xd-modular-drill-body-scf-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685744-original-pixels.png?v=1792977001 Kennametal KenTIP FS 3xD Modular Drill Body — SCF Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-5xd-modular-drill-body-ss-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685753-original-pixels.png?v=1792977024 Kennametal KenTIP FS 5xD Modular Drill Body — SS Shank — Inch Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-3xd-modular-drill-body-ss-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685746-original-pixels.png?v=1792976993 Kennametal KenTIP FS 3xD Modular Drill Body — SS Shank — Inch Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-5xd-modular-drill-body-scf-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685749-original-pixels.png?v=1792977049 Kennametal KenTIP FS 5xD Modular Drill Body — SCF Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-8xd-modular-drill-body-ss-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685757-original-pixels.png?v=1792977011 Kennametal KenTIP FS 8xD Modular Drill Body — SS Shank — Inch Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-8xd-modular-drill-body-scf-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685754-original-pixels.png?v=1792977032 Kennametal KenTIP FS 8xD Modular Drill Body — SCF Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-5xd-modular-drill-body-scf-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685749-original-pixels.png?v=1792977049 Kennametal KenTIP FS 5xD Modular Drill Body — SCF Shank — Inch Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-3xd-modular-drill-body-scf-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685744-original-pixels.png?v=1792977001 Kennametal KenTIP FS 3xD Modular Drill Body — SCF Shank — Inch Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-8xd-modular-drill-body-scf-shank-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685754-original-pixels.png?v=1792977032 Kennametal KenTIP FS 8xD Modular Drill Body — SCF Shank — Inch Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-1-5xd-modular-drill-body-ss-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685742-original-pixels.png?v=1792977042 Kennametal KenTIP FS 1.5xD Modular Drill Body — SS Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-1-5xd-modular-drill-body-scf-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685740-original-pixels.png?v=1792977016 Kennametal KenTIP FS 1.5xD Modular Drill Body — SCF Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-12xd-modular-drill-body-sf-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685736-original-pixels.png?v=1792977057 Kennametal KenTIP FS 12xD Modular Drill Body — SF Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-12xd-modular-drill-body-scf-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685738-original-pixels.png?v=1792977067 Kennametal KenTIP FS 12xD Modular Drill Body — SCF Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and shank. https://www.techtool.com/products/kennametal-kentip-fs-feg-modular-drill-tips-flat-bottom 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-feg-flat-bottom-manufacturer-family.png?v=1792913731 Kennametal KenTIP FS FEG Modular Drill Tips — Flat Bottom Kennametal KenTIP FS FEG flat-bottom drill tip — manufacturer family-representative image; exact dimensions vary by material number. https://www.techtool.com/products/kennametal-kentip-fs-dal-modular-drill-tips-non-ferrous 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-100166308-original-pixels.png?v=1792977558 Kennametal KenTIP FS DAL Modular Drill Tips — Non-Ferrous Kennametal KenTIP FS drill tip — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and configuration. https://www.techtool.com/products/kennametal-kentip-fs-spf-modular-drill-tips-composite 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-spf-insert-black-x1-manufacturer-native-alpha.png?v=1792923731 Kennametal KenTIP FS SPF Modular Drill Tips — Composite Kennametal KenTIP FS SPF modular drill tip — representative manufacturer geometry image; refer to the selected material number for exact dimensions and grade. https://www.techtool.com/products/kennametal-kentip-fs-dav-modular-drill-tips-non-ferrous-and-composite 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-101218484-original-pixels.png?v=1792977566 Kennametal KenTIP FS DAV Modular Drill Tips — Non-Ferrous and Composite Kennametal KenTIP FS drill tip — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and configuration. https://www.techtool.com/products/kennametal-kentip-fs-4xd-modular-drill-body-straight-fluted-bf-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685768-original-pixels.png?v=1792977589 Kennametal KenTIP FS 4xD Modular Drill Body — Straight Fluted — BF Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and configuration. https://www.techtool.com/products/kennametal-kentip-fs-3xd-modular-drill-body-straight-fluted-bf-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685763-original-pixels.png?v=1792977595 Kennametal KenTIP FS 3xD Modular Drill Body — Straight Fluted — BF Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and configuration. https://www.techtool.com/products/kennametal-kentip-fs-5xd-modular-drill-body-straight-flute-flanged-shank-with-flat-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-102685772-original-pixels.png?v=1792977581 Kennametal KenTIP FS 5xD Modular Drill Body — Straight Flute — Flanged Shank with Flat — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and configuration. https://www.techtool.com/products/kennametal-kentip-fs-gtp-modular-drill-tips-multi-purpose 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-102215756-original-pixels.png?v=1792978114 Kennametal KenTIP FS GTP Modular Drill Tips — Multi-Purpose Kennametal KenTIP FS drill tip — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-kentip-fs-3xd-modular-drill-body-straight-flute-flanged-shank-with-flat-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-109501701-original-pixels.png?v=1792977572 Kennametal KenTIP FS 3xD Modular Drill Body — Straight Flute — Flanged Shank with Flat — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and configuration. https://www.techtool.com/products/kennametal-kentip-fs-8xd-modular-drill-body-straight-flute-flanged-shank-with-flat-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-109501703-original-pixels.png?v=1792977602 Kennametal KenTIP FS 8xD Modular Drill Body — Straight Flute — Flanged Shank with Flat — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and configuration. https://www.techtool.com/products/kennametal-kentip-fs-8xd-modular-drill-body-straight-flute-straight-round-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-109501704-original-pixels.png?v=1792977609 Kennametal KenTIP FS 8xD Modular Drill Body — Straight Flute — Straight Round Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and configuration. https://www.techtool.com/products/kennametal-kentip-fs-5xd-modular-drill-body-straight-flute-straight-round-shank-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kentip-fs-109501702-original-pixels.png?v=1792977616 Kennametal KenTIP FS 5xD Modular Drill Body — Straight Flute — Straight Round Shank — Metric Kennametal KenTIP FS drill body — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and configuration. https://www.techtool.com/products/kennametal-kentip-fs-hp-modular-drill-tips-steel-and-cast-iron 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-109501108-original-pixels.png?v=1792978121 Kennametal KenTIP FS HP Modular Drill Tips — Steel and Cast Iron Kennametal KenTIP FS drill tip — representative manufacturer series image; refer to the selected material number for exact geometry, dimensions and grade. https://www.techtool.com/products/kennametal-topswiss-ccgt-lfs 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-topswiss-ccgt-lfs.png?v=1793141933 Kennametal TopSwiss CCGT-LFS Turning Inserts Kennametal TopSwiss CCGT-LFS turning insert — representative manufacturer rendering https://www.techtool.com/products/kennametal-topswiss-ccgt-ffs 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-ccgt-ffs-109337130.png?v=1793142982 Kennametal TopSwiss CCGT-FFS Finishing Inserts Kennametal TopSwiss CCGT-FFS turning insert — representative manufacturer rendering https://www.techtool.com/products/kennametal-topswiss-mbs-hp 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-mbs-hp-109375777.png?v=1793142989 Kennametal TopSwiss MBS HP Micro Boring and Profiling Tools Kennametal TopSwiss MBS HP micro boring insert — representative manufacturer rendering https://www.techtool.com/products/kennametal-kendrill-micro-7xd 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-kendrill-micro-7xd-103354720.png?v=1793143003 Kennametal KenDrill Micro 7×D Carbide Drills — Metric Kennametal KenDrill Micro 7×D metric drill — representative manufacturer rendering https://www.techtool.com/products/kennametal-beyond-evolution-gup-ground-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-beyond-gup-ground-metric-109368588.png?v=1793143012 Kennametal Beyond Evolution GUP Full-Radius Grooving Inserts — Ground — Metric Kennametal Beyond Evolution GUP full-radius grooving insert — representative manufacturer rendering https://www.techtool.com/products/kennametal-beyond-evolution-cl-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-beyond-cl-metric-101093536.png?v=1793143018 Kennametal Beyond Evolution CL Cutoff Inserts — Metric Kennametal Beyond Evolution CL cutoff insert — representative manufacturer rendering https://www.techtool.com/products/kennametal-topswiss-mbs-standard-double-end-holders 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-topswiss-mbs-standard-double-end-holder.png?v=1793147298 Kennametal TopSwiss MBS Standard Double-End Holders Kennametal TopSwiss MBS standard double-end holder — representative manufacturer rendering https://www.techtool.com/products/kennametal-beyond-evolution-integral-holders-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-beyond-evolution-integral-holder.png?v=1793149049 Kennametal Beyond Evolution Integral Holders — Metric Kennametal Beyond Evolution integral holder — representative manufacturer rendering https://www.techtool.com/products/kennametal-beyond-evolution-front-clamp-holders-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-beyond-evolution-front-clamp-holder.png?v=1793149061 Kennametal Beyond Evolution Front-Clamp Holders — Metric Kennametal Beyond Evolution front-clamp holder — representative manufacturer rendering https://www.techtool.com/products/kennametal-scac-zero-degree-turning-holders 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/kennametal-scac-illustrative-rendering.png?v=1793152140 Kennametal SCAC 0° Turning Holders Illustrative rendering of an SCAC flush-shank turning holder; refer to selected material number for exact dimensions and supplied components. https://www.techtool.com/products/guhring-rt-100-u-5514-carbide-drill-3xd 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-5514-rt100u-3xd-series-gray-stage.jpg?v=1793232496 Guhring RT 100 U 5514 Carbide Drill — 3xD Guhring RT 100 U series 5514 carbide drill, manufacturer representative series image https://www.techtool.com/products/guhring-rt-100-xf-6498-carbide-drill-3xd 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-6498-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring RT 100 XF 6498 Carbide Drill — 3xD Guhring series 6498 carbide drill, manufacturer representative series image https://www.techtool.com/products/guhring-rt-100-xf-5498-carbide-drill-5xd 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-5498-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring RT 100 XF 5498 Carbide Drill — 5xD Guhring series 5498 carbide drill, manufacturer representative series image https://www.techtool.com/products/guhring-powertap-4402-spiral-point-tap-unc 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4402-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring PowerTap 4402 Spiral Point Tap — UNC Guhring series 4402 spiral point tap, manufacturer representative series image https://www.techtool.com/products/guhring-powertap-4405-spiral-point-tap-unf 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4405-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring PowerTap 4405 Spiral Point Tap — UNF Guhring series 4405 spiral point tap, manufacturer representative series image https://www.techtool.com/products/guhring-powertap-4415-spiral-point-tap-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4415-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring PowerTap 4415 Spiral Point Tap — Metric Guhring series 4415 spiral point tap, manufacturer representative series image https://www.techtool.com/products/guhring-powertap-4407-spiral-flute-tap-unc 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4407-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring PowerTap 4407 Spiral Flute Tap — UNC Guhring series 4407 spiral flute tap, manufacturer representative series image https://www.techtool.com/products/guhring-powertap-4409-spiral-flute-tap-unf 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4409-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring PowerTap 4409 Spiral Flute Tap — UNF Guhring series 4409 spiral flute tap, manufacturer representative series image https://www.techtool.com/products/guhring-powertap-4411-spiral-flute-tap-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4411-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring PowerTap 4411 Spiral Flute Tap — Metric Guhring series 4411 spiral flute tap, manufacturer representative series image https://www.techtool.com/products/guhring-pionex-4658-spiral-point-tap-unc 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4658-manufacturer-series-gray-stage.jpg?v=1793232240 Guhring Pionex 4658 Spiral Point Tap — UNC Guhring series 4658 spiral point tap, manufacturer representative series image https://www.techtool.com/products/guhring-pionex-4218-spiral-point-tap-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4218-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring Pionex 4218 Spiral Point Tap — Metric Guhring series 4218 spiral point tap, manufacturer representative series image https://www.techtool.com/products/guhring-pionex-4652-spiral-flute-tap-unc 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4652-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring Pionex 4652 Spiral Flute Tap — UNC Guhring series 4652 spiral flute tap, manufacturer representative series image https://www.techtool.com/products/guhring-pionex-393-spiral-flute-tap-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-393-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring Pionex 393 Spiral Flute Tap — Metric Guhring series 393 spiral flute tap, manufacturer representative series image https://www.techtool.com/products/guhring-pionex-4491-form-tap-unc 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4491-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring Pionex 4491 Form Tap — UNC Guhring series 4491 form tap, manufacturer representative series image https://www.techtool.com/products/guhring-pionex-4487-form-tap-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-4487-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring Pionex 4487 Form Tap — Metric Guhring series 4487 form tap, manufacturer representative series image https://www.techtool.com/products/guhring-hr-500-s-1685-carbide-reamer-blind-holes 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-1685-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring HR 500 S 1685 Carbide Reamer — Blind Holes Guhring series 1685 carbide reamer, manufacturer representative series image https://www.techtool.com/products/guhring-hr-500-d-1686-carbide-reamer-through-holes 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/guhring-1686-manufacturer-series-gray-stage.jpg?v=1793232496 Guhring HR 500 D 1686 Carbide Reamer — Through Holes Guhring series 1686 carbide reamer, manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-square-end-mills-stub-standard-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-square-end-mills-stub-standard-inch-representative.png?v=1793239830 Harvey Tool Miniature Square End Mills — Stub & Standard — Inch Harvey Tool Miniature Square End Mills — Stub & Standard — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-square-end-mills-stub-standard-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-square-end-mills-stub-standard-metric-representative.png?v=1793239837 Harvey Tool Miniature Square End Mills — Stub & Standard — Metric Harvey Tool Miniature Square End Mills — Stub & Standard — Metric — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-ball-end-mills-stub-standard-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-ball-end-mills-stub-standard-inch-representative.png?v=1793239844 Harvey Tool Miniature Ball End Mills — Stub & Standard — Inch Harvey Tool Miniature Ball End Mills — Stub & Standard — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-ball-end-mills-stub-standard-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-ball-end-mills-stub-standard-metric-representative.png?v=1793239855 Harvey Tool Miniature Ball End Mills — Stub & Standard — Metric Harvey Tool Miniature Ball End Mills — Stub & Standard — Metric — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-corner-radius-end-mills-stub-standard-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-corner-radius-end-mills-stub-standard-metric-representative.png?v=1793239894 Harvey Tool Miniature Corner Radius End Mills — Stub & Standard — Metric Harvey Tool Miniature Corner Radius End Mills — Stub & Standard — Metric — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-corner-radius-end-mills-stub-standard-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-corner-radius-end-mills-stub-standard-inch-representative.png?v=1793239862 Harvey Tool Miniature Corner Radius End Mills — Stub & Standard — Inch Harvey Tool Miniature Corner Radius End Mills — Stub & Standard — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-square-end-mills-long-reach-standard-flute-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-square-end-mills-long-reach-standard-flute-inch-representative.png?v=1793239901 Harvey Tool Miniature Square End Mills — Long Reach, Standard Flute — Inch Harvey Tool Miniature Square End Mills — Long Reach, Standard Flute — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-square-end-mills-long-reach-standard-flute-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-square-end-mills-long-reach-standard-flute-metric-representative.png?v=1793239908 Harvey Tool Miniature Square End Mills — Long Reach, Standard Flute — Metric Harvey Tool Miniature Square End Mills — Long Reach, Standard Flute — Metric — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-ball-end-mills-long-reach-standard-flute-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-ball-end-mills-long-reach-standard-flute-inch-representative.png?v=1793239914 Harvey Tool Miniature Ball End Mills — Long Reach, Standard Flute — Inch Harvey Tool Miniature Ball End Mills — Long Reach, Standard Flute — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-variable-helix-square-end-mills-for-aluminum-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-variable-helix-square-end-mills-for-aluminum-inch-representative.png?v=1793239923 Harvey Tool Variable Helix Square End Mills for Aluminum — Inch Harvey Tool Variable Helix Square End Mills for Aluminum — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-variable-helix-square-end-mills-for-aluminum-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-variable-helix-square-end-mills-for-aluminum-inch-representative.png?v=1793239923 Harvey Tool Variable Helix Square End Mills for Aluminum — Metric Harvey Tool Variable Helix Square End Mills for Aluminum — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-single-flute-upcut-end-mills-for-plastics-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-single-flute-upcut-end-mills-for-plastics-inch-representative.png?v=1793239931 Harvey Tool Single-Flute Upcut End Mills for Plastics — Inch Harvey Tool Single-Flute Upcut End Mills for Plastics — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-single-flute-downcut-end-mills-for-plastics-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-single-flute-downcut-end-mills-for-plastics-inch-representative.png?v=1793239941 Harvey Tool Single-Flute Downcut End Mills for Plastics — Inch Harvey Tool Single-Flute Downcut End Mills for Plastics — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-270-undercutting-end-mills-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-270-undercutting-end-mills-inch-representative.png?v=1793239950 Harvey Tool 270° Undercutting End Mills — Inch Harvey Tool 270° Undercutting End Mills — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-270-deburring-undercutting-end-mills-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-270-deburring-undercutting-end-mills-inch-representative.png?v=1793239957 Harvey Tool 270° Deburring Undercutting End Mills — Inch Harvey Tool 270° Deburring Undercutting End Mills — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-chamfer-cutters-pointed-flat-end-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-chamfer-cutters-pointed-flat-end-inch-representative.png?v=1793239966 Harvey Tool Chamfer Cutters — Pointed & Flat End — Inch Harvey Tool Chamfer Cutters — Pointed & Flat End — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-helical-flute-chamfer-cutters-pointed-flat-end-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-helical-flute-chamfer-cutters-pointed-flat-end-inch-representative.png?v=1793239972 Harvey Tool Helical-Flute Chamfer Cutters — Pointed & Flat End — Inch Harvey Tool Helical-Flute Chamfer Cutters — Pointed & Flat End — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-engraving-cutters-tipped-off-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-engraving-cutters-tipped-off-inch-representative.png?v=1793239982 Harvey Tool Engraving Cutters — Tipped Off — Inch Harvey Tool Engraving Cutters — Tipped Off — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-helical-flute-engraving-cutters-tipped-off-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-helical-flute-engraving-cutters-tipped-off-inch-representative.png?v=1793239990 Harvey Tool Helical-Flute Engraving Cutters — Tipped Off — Inch Harvey Tool Helical-Flute Engraving Cutters — Tipped Off — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-corner-rounding-end-mills-flared-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-corner-rounding-end-mills-flared-inch-representative.png?v=1793239997 Harvey Tool Corner Rounding End Mills — Flared — Inch Harvey Tool Corner Rounding End Mills — Flared — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-corner-rounding-end-mills-unflared-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-corner-rounding-end-mills-unflared-inch-representative.png?v=1793240005 Harvey Tool Corner Rounding End Mills — Unflared — Inch Harvey Tool Corner Rounding End Mills — Unflared — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-square-keyseat-cutters-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-square-keyseat-cutters-inch-representative.png?v=1793240012 Harvey Tool Square Keyseat Cutters — Inch Harvey Tool Square Keyseat Cutters — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-square-keyseat-cutters-for-non-ferrous-materials-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-square-keyseat-cutters-for-non-ferrous-materials-inch-representative.png?v=1793240019 Harvey Tool Square Keyseat Cutters for Non-Ferrous Materials — Inch Harvey Tool Square Keyseat Cutters for Non-Ferrous Materials — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-drills-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-drills-inch-representative.png?v=1793240027 Harvey Tool Miniature Drills — Inch Harvey Tool Miniature Drills — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-spotting-drills-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-spotting-drills-inch-representative.png?v=1793240035 Harvey Tool Miniature Spotting Drills — Inch Harvey Tool Miniature Spotting Drills — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-reamers-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-reamers-inch-representative.png?v=1793240046 Harvey Tool Miniature Reamers — Inch Harvey Tool Miniature Reamers — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-miniature-reamers-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-miniature-reamers-metric-representative.png?v=1793240055 Harvey Tool Miniature Reamers — Metric Harvey Tool Miniature Reamers — Metric — manufacturer representative series image https://www.techtool.com/products/harvey-tool-single-form-thread-mills-un-threads 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-single-form-thread-mills-un-threads-representative.png?v=1793240061 Harvey Tool Single-Form Thread Mills — UN Threads Harvey Tool Single-Form Thread Mills — UN Threads — manufacturer representative series image https://www.techtool.com/products/harvey-tool-single-form-thread-mills-metric-threads 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-single-form-thread-mills-metric-threads-representative.png?v=1793240068 Harvey Tool Single-Form Thread Mills — Metric Threads Harvey Tool Single-Form Thread Mills — Metric Threads — manufacturer representative series image https://www.techtool.com/products/harvey-tool-multi-form-thread-mills-un-threads 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-multi-form-thread-mills-un-threads-representative.png?v=1793240075 Harvey Tool Multi-Form Thread Mills — UN Threads Harvey Tool Multi-Form Thread Mills — UN Threads — manufacturer representative series image https://www.techtool.com/products/harvey-tool-multi-form-thread-mills-metric-threads 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-multi-form-thread-mills-metric-threads-representative.png?v=1793240082 Harvey Tool Multi-Form Thread Mills — Metric Threads Harvey Tool Multi-Form Thread Mills — Metric Threads — manufacturer representative series image https://www.techtool.com/products/harvey-tool-multi-form-thread-mills-npt-threads 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-multi-form-thread-mills-npt-threads-representative.png?v=1793240088 Harvey Tool Multi-Form Thread Mills — NPT Threads Harvey Tool Multi-Form Thread Mills — NPT Threads — manufacturer representative series image https://www.techtool.com/products/harvey-tool-square-end-mills-for-hardened-steels-45-68-hrc-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-square-end-mills-for-hardened-steels-45-68-hrc-inch-representative.png?v=1793240100 Harvey Tool Square End Mills for Hardened Steels — 45–68 HRC — Inch Harvey Tool Square End Mills for Hardened Steels — 45–68 HRC — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-square-end-mills-for-hardened-steels-up-to-55-hrc-inch 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-square-end-mills-for-hardened-steels-up-to-55-hrc-inch-representative.png?v=1793240108 Harvey Tool Square End Mills for Hardened Steels — Up to 55 HRC — Inch Harvey Tool Square End Mills for Hardened Steels — Up to 55 HRC — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-square-end-mills-for-hardened-steels-up-to-55-hrc-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-square-end-mills-for-hardened-steels-up-to-55-hrc-inch-representative.png?v=1793240108 Harvey Tool Square End Mills for Hardened Steels — Up to 55 HRC — Metric Harvey Tool Square End Mills for Hardened Steels — Up to 55 HRC — Inch — manufacturer representative series image https://www.techtool.com/products/harvey-tool-chamfer-cutters-pointed-flat-end-metric 2026-10-30T05:35:53-04:00 daily https://cdn.shopify.com/s/files/1/0775/2571/3149/files/harvey-tool-chamfer-cutters-pointed-flat-end-inch-representative.png?v=1793239966 Harvey Tool Chamfer Cutters — Pointed & Flat End — Metric Harvey Tool Chamfer Cutters — Pointed & Flat End — Inch — manufacturer representative series image