Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationGuhring order codeCutting diameter [mm]Cutting diameter [in]Shank diameter [mm]Overall length [mm]Flute length [mm]FlutesShank formSurface treatmentTool materialGuhring typePoint angleCutting diameter toleranceCutting directionThrough-tool coolantTools per package
9011360080000 8.000 mm 8.0008.0000.31508.00079.0021.002HBUncoatedHSCONC Spot Drill90°h6Right-handNo1
9011360100000 10.000 mm 10.00010.0000.393710.00089.0025.002HBUncoatedHSCONC Spot Drill90°h6Right-handNo1
9011360120000 12.000 mm 12.00012.0000.472412.000102.0030.002HBUncoatedHSCONC Spot Drill90°h6Right-handNo1
9011360160000 16.000 mm 16.00016.0000.629916.000115.0037.502HBUncoatedHSCONC Spot Drill90°h6Right-handNo1
9011360200000 20.000 mm 20.00020.0000.787420.000131.0045.002HBUncoatedHSCONC Spot Drill90°h6Right-handNo1
Manufacturer warning

This product contains Cobalt Metal Powder, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Technical documents

Compare With Similar Items

Product
Description

Series 1136 HSCO NC spot drills start a hole with a 90° included point. The cutting end is uncoated. Guhring provides operating data for steel, cast iron and aluminum. Use the row for the specific work material and hardness.

Series 1133 HSCO NC spot drills start a hole with a 90° included point. The cutting end has a nano-FIREX coating. Guhring provides operating data for steel, cast iron and aluminum. Use the row for the specific work material and hardness.

Series 546 Carbide NC spot drills start a hole with a 142° included point. The cutting end is uncoated. The series operating guide includes a table for steel. Select cutting speed and feed for the exact EDP, work material, hardness and diameter.

Series 559 HSS NC spot drills start a hole with a 90° included point. The cutting end is uncoated. Guhring provides operating data for steel, cast iron and aluminum. Use the row for the specific work material and hardness.

Series 723 Carbide NC spot drills start a hole with a 90° included point. The cutting end is uncoated. The series operating guide includes a table for steel. Select cutting speed and feed for the exact EDP, work material, hardness and diameter.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Series 1136 HSCO NC spot drills start a hole with a 90° included point. The cutting end is uncoated. Guhring provides operating data for steel, cast iron and aluminum. Use the row for the specific work material and hardness.

Choosing a configuration

The selected row gives cutting and shank diameters, overall length, flute length and flute count. The available range starts at 8.000 mm and ends at 20.000 mm. Check the included angle and the starting diameter needed by the following operation.

Compatibility and use

The selected sizes have an HB shank with a Weldon flat. Match the shank diameter and flat to the holder. Guhring specifies a right-hand cutting direction and no through-coolant passage.

Technical documents

The Guhring 1136 dimensional drawing identifies cutting diameter d1, overall length l1 and flute length l2. The U.S. operating guide gives cutting speed in SFM and feed in inches per revolution. Use the dimensions in the selected EDP’s technical document.

Can I use this tool to finish a drilled hole?

Guhring specifies this tool for spotting only. Select a separate drill for the finished hole diameter and depth.

What quantity should I enter on the quote?

Enter the number of individual spot drills. Each listed EDP has a package quantity of one.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665