GARR carbide cutting tools for machining
This collection brings together GARR TOOL end mills, drills, reamers and carbide rotary burrs. Begin with the operation and workpiece material, then compare the appropriate tool family. A milling cutter, drill and reamer solve different machining tasks; the shared carbide construction does not make their cutting geometry or operating guidance interchangeable.
Choose by the application, then the configuration
Compare the exact EDP rather than choosing from the series name alone. Inch and metric listings may represent different configurations. For repeated jobs, retain the EDP alongside the drawing revision and machining setup.
Start with the operation or maintenance task and the existing equipment. Record the feature, material or sump conditions that determine the choice. A product category helps narrow the search, but the selected configuration supplies the dimensions, geometry and connection requirements needed for the actual job.
Specifications that matter
Review cutting diameter, flute count, cutting length, overall length, shank diameter, end geometry and coating. Read each value with its units and the conditions attached to it. Where the drawing uses a reference letter or subscript, match that reference to the table instead of relying on the apparent proportions of the illustration.
Keep related dimensions together when reviewing the assembly. Overall size, usable length and mounting dimensions describe different requirements. A blank or dash is not a zero value, and an illustration does not establish a tolerance. If a required value is not stated, obtain it before making a fit or performance decision.
Examples in this collection
GARR TOOL 1100 Carbide Drill — Inch
Solid submicron-grain carbide drill for cast iron, tungsten, and materials with high silicon content. Features 3 flutes.
GARR TOOL 1100 Carbide Drill — Inch — ask our team
GARR TOOL 1100 Carbide Drill — Metric
Solid submicron-grain carbide drill for cast iron, tungsten, and materials with high silicon content. Features 3 flutes.
View product specifications and configurations
GARR TOOL 1100H Carbide Drill — Inch
Solid submicron-grain carbide drill for cast iron, tungsten, and materials with high silicon content. Features DURANA coating.
GARR TOOL 1100H Carbide Drill — Inch — ask our team
GARR TOOL 1100H Carbide Drill — Metric
Solid submicron-grain carbide drill for cast iron, tungsten, and materials with high silicon content. Features 3 flutes and DURANA coating.
View product specifications and configurations
Read drawings and manufacturer documents together
Use the selected product’s technical table, dimension drawing and supporting manufacturer documents together. Check the article or EDP identifier and the document’s stated family or configuration scope. A general catalog page can provide context, but it should not override a current product-specific listing when the two disagree.
For a replacement, record the existing identifier and version as well as the required dimensions. For a new assembly, check both sides of every connection. Similar product names, a shared manufacturer and matching nominal dimensions do not by themselves prove compatibility. Follow the selected product’s installation and operating instructions.
Frequently asked questions
Does one cutting guide apply to every GARR tool?
No. Milling, drilling, reaming and rotary filing need guidance appropriate to the tool and operation. Use the selected series documents and any manufacturer conditions stated with them.
How do I avoid ordering the wrong configuration?
Use the exact GARR EDP, including the correct inch or metric listing. Compare the cutting diameter, geometry, lengths, shank and coating in the selected row. A series name identifies a family; it does not fully identify the tool you will receive.
Can I use the product image to confirm fit?
Use images to identify the product type and visible features. Confirm fit from the published dimensions and interface details. Manufacturer illustrations may be representative, and optional or related components shown in a photograph are not proof of the selected article’s scope of delivery.
What should I include when requesting assistance?
Provide the exact article, EDP or model, the application, relevant dimensions and the equipment it must connect to. Include the workpiece or tool requirements and any known installation restrictions. This gives the selection or quote request a defined basis; pricing, stock, lead time and shipping must be confirmed for the actual items.
Contact Tech Tool about your selection
Selection and related resources
Choose the operation first: milling, drilling, reaming or deburring. A series may contain several end geometries, sizes or coatings, so use the selected EDP to identify the tool you need.
Check the configuration table for diameter, cutting length, reach and overall length. Inch and metric families retain their manufacturer dimensions. Product images may represent a series rather than every configuration; the selected EDP and technical specifications govern your selection.
Explore related categories and resources: Carbide End Mills · Carbide Drills · Drill Mills · Carbide Reamers · Carbide Burrs · Technical support.
