Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationGuhring order codePilot diameter [mm]Pilot diameter [in]Body diameter [mm]Overall length [mm]Flute length [mm]Maximum drilling depth [mm]Maximum drilling depth [in]FlutesShank formSurface treatmentTool materialGuhring typePoint angleCutting directionThrough-tool coolantTools per packageCenter-hole formCenter seat angleProtective countersink angleBody form
9002850010000 1.000 mm 1.0001.0000.03946.30040.0010.008.500.3352StraightUncoatedHSSCenter drill118°Right-handNo1B60°120°Non-flatted
9002850016000 1.600 mm 1.6001.6000.06308.00050.0013.0010.600.4172StraightUncoatedHSSCenter drill118°Right-handNo1B60°120°Non-flatted
9002850020000 2.000 mm 2.0002.0000.078710.00056.0016.0013.000.5122StraightUncoatedHSSCenter drill118°Right-handNo1B60°120°Non-flatted
9002850025000 2.500 mm 2.5002.5000.098411.20063.0018.0014.250.5612StraightUncoatedHSSCenter drill118°Right-handNo1B60°120°Non-flatted
9002850031500 3.150 mm 3.1503.1500.124014.00071.0023.0018.280.7192StraightUncoatedHSSCenter drill118°Right-handNo1B60°120°Non-flatted
9002850040000 4.000 mm 4.0004.0000.157516.00080.0027.0021.000.8272StraightUncoatedHSSCenter drill118°Right-handNo1B60°120°Non-flatted
9002850050000 5.000 mm 5.0005.0000.196920.00090.0032.0024.500.9652StraightUncoatedHSSCenter drill118°Right-handNo1B60°120°Non-flatted
9002850063000 6.300 mm 6.3006.3000.248025.000100.0036.0026.551.0452StraightUncoatedHSSCenter drill118°Right-handNo1B60°120°Non-flatted

Technical documents

Compare With Similar Items

Product
Description

Series 285 is a right-hand HSS combined drill and countersink for Form B center holes in steel, gray cast iron and aluminum. The cutting profile forms a 60° center seat with a protective 120° countersink around its rim.

Series 280 is a right-hand HSS combined drill and countersink for Form A center holes in steel, gray cast iron and aluminum. The 60° seat meets the pilot hole directly.

Series 282 is a left-hand HSS combined drill and countersink for Form A center holes in steel, gray cast iron and aluminum. The 60° seat meets the pilot hole directly.

Series 284 is a left-hand HSS combined drill and countersink for Form R center holes in steel, gray cast iron and aluminum. The radius-form cutting profile produces a curved center seat for work supported between centers.

Series 287 is a right-hand HSS combined drill and countersink for Form A center holes in steel, gray cast iron and aluminum. The 60° seat meets the pilot hole directly.

Series 289 is a right-hand HSS combined drill and countersink for Form B center holes in steel, gray cast iron and aluminum. The cutting profile forms a 60° center seat with a protective 120° countersink around its rim.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Series 285 is a right-hand HSS combined drill and countersink for Form B center holes in steel, gray cast iron and aluminum. The cutting profile forms a 60° center seat with a protective 120° countersink around its rim.

Choosing a configuration

Choose the diameter of the small pilot d1. The larger dimension d2 is the body diameter used to select the holder. The pilot diameters shown range from 1.000–6.300 mm.

Compatibility and use

This series has a straight, non-flatted body. Match the listed body diameter and overall length to the holder and available clearance. Guhring specifies right-hand cutting and no through-tool coolant.

Technical documents

The Guhring 285 drawing shows pilot diameter d1, body diameter d2 and overall length l1. Use the EDP row in the series dimensional table and the matching cutting-data sheet for surface speed and feed per revolution.

What is the difference between the pilot point and the center angle?

The small pilot has a 118° point. The next cutting surface forms the 60°/120° profile shown on the series drawing. Select the tool by the center-hole profile your drawing requires.

Which diameter do I use for the holder?

The listed tool body diameter is d2. The smaller d1 dimension describes the pilot. Check d2 on the selected EDP before choosing a holder.

How many center drills are included per EDP?

The package quantity is one. Enter the number of individual drills required on your quote.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665