Kennametal HARVI I TE DUO-LOCK Chamfered Milling Heads — Inch
Kennametal HARVI I TE DUO-LOCK Chamfered Milling Heads — Inch
Use these four-flute chamfered heads for rough and finish milling with a matching DUO-LOCK adapter.
Compare the KCPM15 configurations by cutting diameter, axial depth and DL coupling size. Each quoted unit is one cutting head.
Technical Specifications
Tool configurations
| Article ID | Configuration | Catalog ID | End geometry | Grade | Cutting diameter (in) | Maximum axial depth (in) | Gage length (in) | Coupling | Flutes | BCH (in) | Example compatible adapter order no. |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 7136410 | H1TE4CH0375R056DL | H1TE4CH0375R056DL | Chamfered | KCPM15 | 0.3750 | 0.5625 | 0.8425 | DL10 | 4 | 0.0200 | 6136800 |
| 7136461 | H1TE4CH0500R075DL | H1TE4CH0500R075DL | Chamfered | KCPM15 | 0.5000 | 0.7500 | 1.1260 | DL12 | 4 | 0.0200 | 6136868 |
| 7136462 | H1TE4CH0625R094DL | H1TE4CH0625R094DL | Chamfered | KCPM15 | 0.6250 | 0.9375 | 1.4055 | DL16 | 4 | 0.0200 | 6136874 |
| 7136463 | H1TE4CH0750R113DL | H1TE4CH0750R113DL | Chamfered | KCPM15 | 0.7500 | 1.1250 | 1.6890 | DL20 | 4 | 0.0200 | 6136880 |
| 7136466 | H1TE4CH1000R150DL | H1TE4CH1000R150DL | Chamfered | KCPM15 | 1.0000 | 1.5000 | 2.2520 | DL25 | 4 | 0.0200 | 6136884 |
| 7136467 | H1TE4CH1250R188DL | H1TE4CH1250R188DL | Chamfered | KCPM15 | 1.2500 | 1.8750 | 2.8150 | DL32 | 4 | 0.0200 | 6136888 |
Technical documents
Kennametal DUO-LOCK chamfered heads — current U.S. specification table
Kennametal DUO-LOCK chamfered heads — current U.S. specification table (PDF)
Technical guidance & FAQs
Applications and materials
Choosing a configuration
Compatibility and use
Technical documents
What does a quote quantity of one include?
One modular cutting head. Request a compatible adapter separately if your setup needs one.
Can I select the adapter by cutting diameter alone?
Compare the DL coupling size first. The chart gives a specific compatible adapter order number and the cutting diameter for the selected head.
Which dimensions control the cut?
Compare cutting diameter, maximum axial depth and chamfer width. Check gage length against clearance around the feature.