Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeChipbreakerWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [in]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per caseCorner radius referenceCompatible Mitsubishi holder (example)
265906 CCET21.5V3RWSN / CCET0602V3RW-SN CCET21.5V3RWSNCCET0602V3RW-SNVP15TFRW-SNcast iron, stainless steel, steel, heat-resistant alloys6.352.380.036.45.11028072Right10Maximum corner radiusSCLCR-062SM · EDP 337210
266423 CCET32.5V3RWSN / CCET09T3V3RW-SN CCET32.5V3RWSNCCET09T3V3RW-SNVP15TFRW-SNcast iron, stainless steel, steel, heat-resistant alloys9.5253.970.039.67.17328072Right10Maximum corner radiusSCLCR-063SM · EDP 337228

Technical documents

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies VP15TF in the RW-SN geometry for cast iron, stainless steel, steel, heat-resistant alloys. These right-hand inserts have a 80° corner and 7° relief.

Choosing a configuration

The listed configurations have an inscribed circle of 6.35–9.525 mm, a thickness of 2.38–3.97 mm and a nose radius of 0.03 mm. Read the dimensions on the row for the exact EDP. A corner radius marked maximum is an upper limit for that EDP.

Compatibility and use

Match the CCET designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The chart gives the mounting hole in inches and the inscribed circle, thickness and radius in millimeters.

Technical documents

The Mitsubishi U.S. turning catalog pairs the ANSI and ISO order numbers with VP15TF grade availability and nose radius on PDF page 155. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for CCET-RW-SN in VP15TF?

Mitsubishi identifies the configurations shown as right-hand. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this VP15TF group are 0.03 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665