Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeChipbreakerWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [in]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per caseCompatible Mitsubishi holder (example)
266431 CCGT21.50.2LSN / CCGT060201L-SN CCGT21.50.2LSNCCGT060201L-SNVP15TFL-SNcast iron, stainless steel, steel, heat-resistant alloys6.352.380.16.45.118072Left10SCLCL-062SM · EDP 337181
266466 CCGT21.50.5LSN / CCGT060202L-SN CCGT21.50.5LSNCCGT060202L-SNVP15TFL-SNcast iron, stainless steel, steel, heat-resistant alloys6.352.380.26.45.118072Left10SCLCL-062SM · EDP 337181
266597 CCGT32.5V3LSN / CCGT09T3V3L-SN CCGT32.5V3LSNCCGT09T3V3L-SNVP15TFL-SNcast iron, stainless steel, steel, heat-resistant alloys9.5253.970.039.67.17328072Left10SCLCL-063SM · EDP 337199
266520 CCGT32.50.2LSN / CCGT09T301L-SN CCGT32.50.2LSNCCGT09T301L-SNVP15TFL-SNcast iron, stainless steel, steel, heat-resistant alloys9.5253.970.19.67.1738072Left10SCLCL-063SM · EDP 337199
266554 CCGT32.50.5LSN / CCGT09T302L-SN CCGT32.50.5LSNCCGT09T302L-SNVP15TFL-SNcast iron, stainless steel, steel, heat-resistant alloys9.5253.970.29.67.1738072Left10SCLCL-063SM · EDP 337199
266589 CCGT32.51LSN / CCGT09T304L-SN CCGT32.51LSNCCGT09T304L-SNVP15TFL-SNcast iron, stainless steel, steel, heat-resistant alloys9.5253.970.49.67.1738072Left10SCLCL-063SM · EDP 337199

Technical documents

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies VP15TF in the L-SN geometry for cast iron, stainless steel, steel, heat-resistant alloys. These left-hand inserts have a 80° corner and 7° relief.

Choosing a configuration

The listed configurations have an inscribed circle of 6.35–9.525 mm, a thickness of 2.38–3.97 mm and a nose radius of 0.03–0.4 mm. Read the dimensions on the row for the exact EDP.

Compatibility and use

Match the CCGT designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The chart gives the mounting hole in inches and the inscribed circle, thickness and radius in millimeters.

Technical documents

The Mitsubishi U.S. turning catalog pairs the ANSI and ISO order numbers with VP15TF grade availability and nose radius on PDF page 155. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for CCGT-L-SN in VP15TF?

Mitsubishi identifies the configurations shown as left-hand. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this VP15TF group are 0.03–0.4 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665