Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationOrder numberAlternate ANSI designationCutting handMinimum bore diameter [in]Shank diameter [in]Functional length [in]Reduced diameter length [in]Functional width [in]Shank height [in]Radial rake angle [°]Cutting edge angle [°]Insert pocket designationHolders per sales unitInsert clamping screwWrench
104428 S-SCLCR-103 / 5/8 in shank S-SCLCR-103S10M-SCLCR3Right.797.62581.25.406.561095CC__32.51TS4 (EDP 108740)TKY15F (EDP 106901)
104429 S-SCLCR-123 / 3/4 in shank S-SCLCR-123S12S-SCLCR3Right.954.75101.875.5.7895CC__32.51TS4 (EDP 108740)TKY15F (EDP 106901)

Compatible components

For article 104428

Components are selected separately. Open a part number to review its specifications and add it to your quote.

Inserts (81)
Article IDCatalog numberGrade
10560822CCMT32.50.5LSMP9005
10560839CCMT32.51LSMP9005
10560846CCMT32.52LSMP9005
10560983CCMT32.50.5LSMP9015
10560990CCMT32.51LSMP9015
10561003CCMT32.52LSMP9015
10610411CCMT32.50.5LSMP9025
10610428CCMT32.51LSMP9025
10610435CCMT32.52LSMP9025
10651902CCMT32.51MKMC5115
10651919CCMT32.52MKMC5115
22906359CCMT32.51MKMC5125
22906366CCMT32.52MKMC5125
23006539CCMT32.51MPMC6125
23006546CCMT32.52MPMC6125
23023130CCMT32.51MPMC6115
23023147CCMT32.52MPMC6115
23030305CCMT32.50.5FPMC6125
23030312CCMT32.51FPMC6125
23030329CCMT32.52FPMC6125
23030374CCMT32.51LPMC6125
23030381CCMT32.52LPMC6125
23030411CCMT32.50.5FVMC6125
23030428CCMT32.51FVMC6125
23030435CCMT32.52FVMC6125
23030459CCMT32.50.5MPMC6125
23031586CCMT32.50.5FPMC6115
23031616CCMT32.51FPMC6115
23031630CCMT32.52FPMC6115
23032637CCMT32.51LPMC6115
23032668CCMT32.52LPMC6115
23033122CCMT32.50.5MPMC6115
23033382CCMT32.51MWMC6115
23033399CCMT32.52MWMC6115
23033443CCMT32.50.5SWMC6115
23033450CCMT32.51SWMC6115
23558649CCMT32.50.5MKMC5125
23564862CCMT32.50.5MKMC5115
23567887CCMT32.51MKMC5105
23567894CCMT32.52MKMC5105
23567900CCMT32.50.5MKMC5105
23604216CCMT32.50.5LPMC6115
23604377CCMT32.52SWMC6115
23623170CCMT32.50.5LPMC6125
23661417CCMT32.50.5FPMC6135
23661424CCMT32.51FPMC6135
23661431CCMT32.52FPMC6135
23661783CCMT32.51MWMC6135
23661790CCMT32.52MWMC6135
23662278CCMT32.51FVMC6135
23662285CCMT32.52FVMC6135
23662742CCMT32.50.5LPMC6135
23662759CCMT32.51LPMC6135
23662766CCMT32.52LPMC6135
23663220CCMT32.50.5MPMC6135
23663237CCMT32.51MPMC6135
23663244CCMT32.52MPMC6135
23663817CCMT32.50.5SWMC6135
23663824CCMT32.51SWMC6135
23663831CCMT32.52SWMC6135
23842687CCMT32.51LMMC7115
23842700CCMT32.51MMMC7115
23842748CCMT32.52LMMC7115
23842762CCMT32.52MMMC7115
23852594CCMT32.51LMMP7135
23852600CCMT32.52LMMP7135
23852877CCMT32.51MMMP7135
23852884CCMT32.52MMMP7135
23853133CCMT32.50.5MMMP7135
23853140CCMT32.51FMMP7135
23853157CCMT32.52FMMP7135
23857964CCMT32.50.5MMMC7125
23857988CCMT32.51LMMC7125
23858008CCMT32.51MMMC7125
23858022CCMT32.52LMMC7125
23858046CCMT32.52MMMC7125
461464CCGT32.50.5AZHTi10
461472CCGT32.51AZHTi10
461481CCGT32.52AZHTi10
693046CCMT32.51MPMP3025
693054CCMT32.52MPMP3025

Contact Tech Tool to confirm the complete assembly and package contents before ordering.

Technical documents

Technical guidance & FAQs

Applications and materials

Use these right-hand bars for internal turning with a 95° approach and a screw-on, 7° positive insert. The steel shank and two-wall pocket support the insert. Select the insert grade for the work material and the intended cut.

Choosing a configuration

Check the smallest diameter the bar must enter. The 5/8 in bar requires at least 0.797 in, and the 3/4 in bar requires at least 0.954 in. Compare the bar length, reduced section length and actual working overhang with the bore depth.

Compatibility and use

Both bars accept the CC 32.5 pocket size. Use the compatible insert table for an exact insert designation and grade. The replacement clamping screw is TS4, EDP 108740. The matching wrench is TKY15F, EDP 106901.

Technical documents

Page E012 of the Mitsubishi boring catalog covers steel-shank S-SCLC dimensions and service parts. The cutting conditions sheet uses different overhang bands for different shank materials. Read the steel-shank band and the row for your work material.

What is the difference between the EDP and the alternate designation?

EDP 104428 identifies S-SCLCR-103, also designated S10M-SCLCR3. EDP 104429 identifies S-SCLCR-123, also designated S12S-SCLCR3.

What does a quote quantity of one include?

Mitsubishi lists one boring bar per sales unit. Request inserts separately by their own EDP and the number of individual inserts needed.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665