Mitsubishi Materials TCGT-FJ-P RT9005 Turning Inserts
Mitsubishi Materials TCGT-FJ-P RT9005 Turning Inserts
These neutral TCGT inserts combine the FJ-P chipbreaker and RT9005 grade for turning nonferrous metals, heat-resistant alloys. The triangular cutting edge has a 60° included angle and 7° relief. Compare inscribed circle, thickness and nose radius by EDP to match the insert to your holder.
Technical Specifications
Tool configurations
| Article ID | Configuration | ANSI designation | ISO designation | Grade | Chipbreaker | Workpiece material | Inscribed circle [mm] | Thickness [mm] | Nose radius [mm] | Cutting edge length [mm] | Mounting hole diameter [in] | Included corner angle [°] | Relief angle [°] | Cutting corners | Hand | Inserts per case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 252064 | TCGT21.5V5FJ-P / TCGT1102V5-FJ-P | TCGT21.5V5FJ-P | TCGT1102V5-FJ-P | RT9005 | FJ-P | nonferrous metals, heat-resistant alloys | 6.35 | 2.38 | 0.05 | 11 | .11 | 60 | 7 | 3 | Neutral | 10 |
| 251563 | TCGT21.50.5FJ-P / TCGT110202-FJ-P | TCGT21.50.5FJ-P | TCGT110202-FJ-P | RT9005 | FJ-P | nonferrous metals, heat-resistant alloys | 6.35 | 2.38 | 0.2 | 11 | .11 | 60 | 7 | 3 | Neutral | 10 |
| 256209 | TCGT32.5V5FJ-P / TCGT16T3V5-FJ-P | TCGT32.5V5FJ-P | TCGT16T3V5-FJ-P | RT9005 | FJ-P | nonferrous metals, heat-resistant alloys | 9.525 | 3.97 | 0.05 | 16.5 | .173 | 60 | 7 | 3 | Neutral | 10 |
| 252101 | TCGT32.50.2FJ-P / TCGT16T301-FJ-P | TCGT32.50.2FJ-P | TCGT16T301-FJ-P | RT9005 | FJ-P | nonferrous metals, heat-resistant alloys | 9.525 | 3.97 | 0.1 | 16.5 | .173 | 60 | 7 | 3 | Neutral | 10 |
| 252081 | TCGT32.50.5FJ-P / TCGT16T302-FJ-P | TCGT32.50.5FJ-P | TCGT16T302-FJ-P | RT9005 | FJ-P | nonferrous metals, heat-resistant alloys | 9.525 | 3.97 | 0.2 | 16.5 | .173 | 60 | 7 | 3 | Neutral | 10 |
Technical documents
Technical guidance & FAQs
Applications and materials
Choosing a configuration
Compatibility and use
Technical documents
Which hand is listed for TCGT-FJ-P in RT9005?
Mitsubishi identifies the configurations shown as neutral. Check the hand and the complete order number against the holder specification.
Which dimension controls the nose radius?
RE is the nose radius. The values shown for this RT9005 group are 0.05–0.2 mm. Use the exact EDP row when selecting a replacement.
How many inserts are in two cases?
Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.