Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeChipbreakerWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [in]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
233091 TCGT1.211LF / TCGT060104L-F TCGT1.211LFTCGT060104L-FHTi10L-Fnonferrous metals, heat-resistant alloys3.971.590.46.88.0916073Left10

Technical documents

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies HTi10 in the L-F geometry for nonferrous metals, heat-resistant alloys. These left-hand inserts have a 60° corner and 7° relief.

Choosing a configuration

The listed configurations have an inscribed circle of 3.97 mm, a thickness of 1.59 mm and a nose radius of 0.4 mm. Read the dimensions on the row for the exact EDP.

Compatibility and use

Match the TCGT designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The chart gives the mounting hole in inches and the inscribed circle, thickness and radius in millimeters.

Technical documents

The Mitsubishi U.S. turning catalog pairs the ANSI and ISO order numbers with HTi10 grade availability and nose radius on PDF page 173. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for TCGT-L-F in HTi10?

Mitsubishi identifies the configurations shown as left-hand. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this HTi10 group are 0.4 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665