Premium Unisex Controlled Chaos — Five-Axis Flow T-Shirt
Premium Unisex Controlled Chaos — Five-Axis Flow T-Shirt
Five axes. One unwavering standard.
Fabric Content:
- 100% combed ring-spun cotton
Details:
- Lightweight 4.3 oz/yd² jersey
- Fitted cut; size up for more room
- Pre-shrunk, side-seamed construction
- Tech Tool left-chest print and original back graphic
- Custom Tech Tool inside label
View size chart
View size chart
Measure a similar garment laid flat. Chest width is measured across the garment, not around your body. Length is measured from the high point of the shoulder to the hem.
| Size | Length | Chest width |
|---|---|---|
| XS | 27 | 17.5 |
| S | 28 | 19 |
| M | 29 | 20.5 |
| L | 30 | 22 |
| XL | 31 | 24 |
| 2XL | 32 | 26 |
| 3XL | 33 | 28 |
| 4XL | 34 | 30 |
| 5XL | 35 | 32 |
| Size | Length | Chest width |
|---|---|---|
| XS | 68.6 | 44.5 |
| S | 71.1 | 48.3 |
| M | 73.7 | 52.1 |
| L | 76.2 | 55.9 |
| XL | 78.7 | 61.0 |
| 2XL | 81.3 | 66.0 |
| 3XL | 83.8 | 71.1 |
| 4XL | 86.4 | 76.2 |
| 5XL | 88.9 | 81.3 |
Measurements follow the Next Level 3600 manufacturer specification; 4XL and 5XL values are manufacturer measurements. Actual garment measurements can vary by up to 2 inches (5 cm). Available sizes vary by color.
Care
Care
Machine wash cold, inside out, on a gentle cycle with mild detergent and similar colors. Use non-chlorine bleach only when needed. Do not use fabric softener. Hang dry or tumble dry low. Cool iron inside out if needed; do not iron the print. Do not dry clean.
Production & shipping
Production & shipping
Each piece is made to order. Production time is separate from carrier transit time. Shipping rates are calculated at checkout, and tracking is provided when your order ships.
Items in the same order may arrive in separate packages.
Returns & support
Returns & support
Each piece is made to order. Returns or exchanges for size selection or a change of mind are not accepted. Please check the size guide before ordering.
Defective, damaged, misprinted, or incorrect items are covered. Contact orders@techtool.com with your order number and clear photos so we can arrange a replacement or refund as appropriate. Contact us before returning an item.
Your rights under applicable law are not affected.
