Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationGuhring order codeCutting diameter [in]Shank diameter [in]Overall length [in]Length of cut [in]Corner chamfer [in]FlutesShank formSurface treatmentTool materialGuhring typeCutting diameter toleranceHelix angle [°]Cutting edgeCutting directionThrough-tool coolantTools per package
9031000095200 3/8 in 9.5203/83/82 1/210.0084HB Weldon flatFIREXCarbideRF 100 Uh1035/38Corner ChamferRHNo1
9031000127000 1/2 in 12.7001/21/2310.0104HB Weldon flatFIREXCarbideRF 100 Uh1035/38Corner ChamferRHNo1
9031000158700 5/8 in 15.8705/85/83 1/21 1/40.0144HB Weldon flatFIREXCarbideRF 100 Uh1035/38Corner ChamferRHNo1
9031000190500 3/4 in 19.0503/43/441 1/20.0184HB Weldon flatFIREXCarbideRF 100 Uh1035/38Corner ChamferRHNo1
9031000254000 1 in 25.4001141 1/20.0304HB Weldon flatFIREXCarbideRF 100 Uh1035/38Corner ChamferRHNo1
Manufacturer warning

This product contains Cobalt Metal Powder, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Technical documents

Technical guidance & FAQs

Applications and materials

Guhring lists steel and gray, malleable and spheroidal cast iron as the primary applications for this center-cutting end mill. Select cutting conditions by material, diameter and operation in the RF 100 cutting-data guide.

Choosing a configuration

Compare cutting and shank diameters, overall length, length of cut and corner chamfer. This inch series lists dimensions in inches. The corner chamfer defines the edge at the end of the tool.

Compatibility and use

The HB Weldon-flat shank must match the selected holder and clamping diameter. Use the length of cut and reach where specified to check shoulder depth and clearance.

Technical documents

The series 3100 drawing identifies the dimensions used in the chart. Review the manufacturer’s cutting data for the selected work material. Exact-item data sheets supplement the series catalog where its dimensions differ.

What shank does RF 100 U series 3100 use?

This series uses the HB Weldon-flat form. The configuration chart identifies each exact cutting diameter and corresponding shank diameter.

Does the quote quantity refer to tools or packs?

Guhring specifies one tool per package for the listed EDPs. Enter the number of individual tools you require.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665