Guhring RF 100 U 3100 Inch End Mills — HB Weldon-flat
Guhring RF 100 U 3100 Inch End Mills — HB Weldon-flat
Guhring RF 100 U series 3100 combines four flutes, a chamfered corner and FIREX-coated carbide for milling steel and cast iron. This standard length family uses a HB Weldon-flat shank and inch cutting diameters. Choose a cutting diameter to compare dimensions and request a quote.
Technical Specifications
Tool configurations
| Article ID | Configuration | Guhring order code | Cutting diameter [in] | Shank diameter [in] | Overall length [in] | Length of cut [in] | Corner chamfer [in] | Flutes | Shank form | Surface treatment | Tool material | Guhring type | Cutting diameter tolerance | Helix angle [°] | Cutting edge | Cutting direction | Through-tool coolant | Tools per package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 9031000095200 | 3/8 in | 9.520 | 3/8 | 3/8 | 2 1/2 | 1 | 0.008 | 4 | HB Weldon flat | FIREX | Carbide | RF 100 U | h10 | 35/38 | Corner Chamfer | RH | No | 1 |
| 9031000127000 | 1/2 in | 12.700 | 1/2 | 1/2 | 3 | 1 | 0.010 | 4 | HB Weldon flat | FIREX | Carbide | RF 100 U | h10 | 35/38 | Corner Chamfer | RH | No | 1 |
| 9031000158700 | 5/8 in | 15.870 | 5/8 | 5/8 | 3 1/2 | 1 1/4 | 0.014 | 4 | HB Weldon flat | FIREX | Carbide | RF 100 U | h10 | 35/38 | Corner Chamfer | RH | No | 1 |
| 9031000190500 | 3/4 in | 19.050 | 3/4 | 3/4 | 4 | 1 1/2 | 0.018 | 4 | HB Weldon flat | FIREX | Carbide | RF 100 U | h10 | 35/38 | Corner Chamfer | RH | No | 1 |
| 9031000254000 | 1 in | 25.400 | 1 | 1 | 4 | 1 1/2 | 0.030 | 4 | HB Weldon flat | FIREX | Carbide | RF 100 U | h10 | 35/38 | Corner Chamfer | RH | No | 1 |
Manufacturer warning
This product contains Cobalt Metal Powder, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Technical documents
Guhring 9031000254000 individual data sheet
Guhring 9031000254000 individual data sheet (PDF)
Technical guidance & FAQs
Applications and materials
Choosing a configuration
Compatibility and use
Technical documents
What shank does RF 100 U series 3100 use?
This series uses the HB Weldon-flat form. The configuration chart identifies each exact cutting diameter and corresponding shank diameter.
Does the quote quantity refer to tools or packs?
Guhring specifies one tool per package for the listed EDPs. Enter the number of individual tools you require.