Mitsubishi Materials CNMG-MS MP9015 Turning Inserts
Mitsubishi Materials CNMG-MS MP9015 Turning Inserts
Use these 80° CNMG-MS inserts for medium turning in heat-resistant alloys. Mitsubishi positions MP9015 as its general-purpose grade for heat-resistant alloys. Both sizes fit the DCLN 32 pocket and have a 3/8 in. inscribed circle. Choose the 0.4 mm or 0.8 mm nose radius by EDP.
Technical Specifications
Tool configurations
| Article ID | Configuration | ANSI designation | ISO designation | Grade | Cutting geometry | Workpiece material | Inscribed circle [mm] | Thickness [mm] | Nose radius [mm] | Cutting edge length [mm] | Mounting hole diameter [mm] | Included corner angle [°] | Relief angle [°] | Cutting corners | Hand | Inserts per case | Compatible DCLN holders |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10587577 | CNMG321MS / CNMG090304-MS | CNMG321MS | CNMG090304-MS | MP9015 | MS | Heat-resistant alloys | 9.525 | 3.18 | 0.4 | 9.67 | 3.81 | 80 | 0 | 4 | Neutral | 10 | DCLNR-123 (371080), DCLNL-163 (371354), DCLNR-163 (371362) |
| 10587584 | CNMG322MS / CNMG090308-MS | CNMG322MS | CNMG090308-MS | MP9015 | MS | Heat-resistant alloys | 9.525 | 3.18 | 0.8 | 9.67 | 3.81 | 80 | 0 | 4 | Neutral | 10 | DCLNR-123 (371080), DCLNL-163 (371354), DCLNR-163 (371362) |
Technical documents
Compare With Similar Items
| Product | ||||||
|---|---|---|---|---|---|---|
| Description | Use these 80° CNMG-MS inserts for medium turning in heat-resistant alloys. Mitsubishi positions MP9015 as its general-purpose grade for heat-resistant alloys. Both sizes fit the DCLN 32 pocket and have a 3/8 in. inscribed circle. Choose the 0.4 mm or 0.8 mm nose radius by EDP. |
These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius. |
| Price | Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Technical guidance & FAQs
Applications and materials
Choosing a configuration
Compatibility and use
Technical documents
Which EDP has the 0.8 mm nose radius?
EDP 10587584 is the CNMG322MS in grade MP9015. The smaller 0.4 mm radius is EDP 10587577.
Can the same insert fit the left- and right-hand DCLN holders?
Yes. Mitsubishi lists these neutral inserts for the left-hand DCLNL-163 and right-hand DCLNR-163, as well as DCLNR-123. Verify the pocket designation on the installed holder.
What quantity should I request for one case?
Enter 10 for one case. The quote quantity counts individual inserts.