Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeCutting geometryWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
24318181 TNGG330.5LF / TNGG160402L-F TNGG330.5LFTNGG160402L-FMX3115Fsteel9.5254.760.216.53.816006Left10
24318204 TNGG331LF / TNGG160404L-F TNGG331LFTNGG160404L-FMX3115Fsteel9.5254.760.416.53.816006Left10
24318228 TNGG332LF / TNGG160408L-F TNGG332LFTNGG160408L-FMX3115Fsteel9.5254.760.816.53.816006Left10

Technical documents

Compare With Similar Items

Product
Description

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Use these 80° CNMG-MS inserts for medium turning in heat-resistant alloys. Choose MP9025 when interrupted cutting calls for greater edge stability. Both sizes fit the DCLN 32 pocket and have a 3/8 in. inscribed circle. Choose the 0.4 mm or 0.8 mm nose radius by EDP.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies MX3115 in the F geometry for steel. These left-hand inserts have a 60° corner and 0° relief. For steel at 180–280 HB, Mitsubishi lists a cutting speed of 200–265 m/min for MX3115 with the R/L-F chipbreaker. Its finishing range for that material is 0.05–0.12 mm/rev feed and 0.10–0.50 mm depth of cut. See the conditions on page 17 of the guide.

Choosing a configuration

The listed configurations have an inscribed circle of 9.525 mm, a thickness of 4.76 mm and a nose radius of 0.2–0.8 mm. Read the dimensions on the row for the exact EDP.

Compatibility and use

Match the TNGG designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The mounting hole, inscribed circle, thickness and corner radius are listed in millimeters.

Technical documents

Mitsubishi lists the MX3115 TNGG-F order codes and dimensions on page 8. Page 17 gives finishing conditions by steel hardness and grade. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for TNGG-F in MX3115?

Mitsubishi identifies the configurations shown as left-hand. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this MX3115 group are 0.2–0.8 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665