Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeCutting geometryWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per caseCorner radius reference
24163491 CCET21.50.2MRSS / CCET060201MR-SS CCET21.50.2MRSSCCET060201MR-SSLC2005MR-SSnonferrous metals6.352.380.16.452.88072Right10Maximum corner radius
24163538 CCET21.50.5MRSS / CCET060202MR-SS CCET21.50.5MRSSCCET060202MR-SSLC2005MR-SSnonferrous metals6.352.380.26.452.88072Right10Maximum corner radius
24163576 CCET32.50.2MRSS / CCET09T301MR-SS CCET32.50.2MRSSCCET09T301MR-SSLC2005MR-SSnonferrous metals9.5253.970.19.674.48072Right10Maximum corner radius
24163613 CCET32.50.5MRSS / CCET09T302MR-SS CCET32.50.5MRSSCCET09T302MR-SSLC2005MR-SSnonferrous metals9.5253.970.29.674.48072Right10Maximum corner radius
24163651 CCET32.51MRSS / CCET09T304MR-SS CCET32.51MRSSCCET09T304MR-SSLC2005MR-SSnonferrous metals9.5253.970.49.674.48072Right10Maximum corner radius

Technical documents

Compare With Similar Items

Product
Description

These right-hand CCET-MR-SS turning inserts use Mitsubishi’s LC2005 hydrogen-free diamond-like carbon coating for nonferrous metals, including aluminum alloys. Compare the 80° inserts by EDP, corner radius and mounting hole diameter to select a replacement for your holder.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies LC2005 in the MR-SS geometry for nonferrous metals. These right-hand inserts have a 80° corner and 7° relief.

Choosing a configuration

The listed configurations have an inscribed circle of 6.35–9.525 mm, a thickness of 2.38–3.97 mm and a nose radius of 0.1–0.4 mm. Read the dimensions on the row for the exact EDP. A corner radius marked maximum is an upper limit for that EDP.

Compatibility and use

Match the CCET designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The mounting hole, inscribed circle, thickness and corner radius are listed in millimeters.

Technical documents

Mitsubishi’s U.S. LC2005 guide lists the ANSI order numbers, cutting applications, case quantity and dimensional limits on printed page 5. Compare the exact EDP and ISO designations in the chart. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for CCET-MR-SS in LC2005?

Mitsubishi identifies the configurations shown as right-hand. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this LC2005 group are 0.1–0.4 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665