Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeChipbreakerWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
23661325 CCMT21.50.5FP / CCMT060202-FP CCMT21.50.5FPCCMT060202-FPMC6135FPSteel6.352.380.26.452.88072Neutral10
23661332 CCMT21.51FP / CCMT060204-FP CCMT21.51FPCCMT060204-FPMC6135FPSteel6.352.380.46.452.88072Neutral10
23661417 CCMT32.50.5FP / CCMT09T302-FP CCMT32.50.5FPCCMT09T302-FPMC6135FPSteel9.5253.970.29.674.48072Neutral10
23661424 CCMT32.51FP / CCMT09T304-FP CCMT32.51FPCCMT09T304-FPMC6135FPSteel9.5253.970.49.674.48072Neutral10
23661431 CCMT32.52FP / CCMT09T308-FP CCMT32.52FPCCMT09T308-FPMC6135FPSteel9.5253.970.89.674.48072Neutral10

Technical documents

Compare With Similar Items

Product
Description

Use Mitsubishi CCMT-FP MC6135 inserts for finishing in steel. The FP chipbreaker uses a projection near the insert nose to guide chips at shallow depths of cut. Each CVD-coated carbide insert has an 80° corner angle and 7° relief. Compare the inscribed circle, thickness and nose radius to match your holder. Quote quantities are individual inserts, with ten inserts per manufacturer case.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

CCMT-FP MC6135 is a positive, two-corner CVD-coated carbide insert for finishing in steel. The FP chipbreaker uses a projection near the insert nose to guide chips at shallow depths of cut.

Choosing a configuration

These MC6135 sizes have inscribed-circle diameters of 6.35, 9.525 mm. Compare thickness and nose radius under the selected EDP. The chart lists both the ANSI and ISO designation for each geometry.

Compatibility and use

Match the full CCMT designation to the holder’s accepted insert size, included angle, positive relief and clamping system. A matching nose radius alone does not establish pocket fit.

Technical documents

The insert table on printed page 27 identifies CCMT-FP dimensions and grade availability. See printed page 12 for the FP chipbreaker application. Use the dimensional drawing with the selected chart row to identify the clamping hole and cutting dimensions.

What do the ANSI and ISO designations identify?

Each row gives both designations for the same MC6135 insert. Use the EDP on that row when ordering or requesting a quote.

When should I consider the FP chipbreaker?

The FP chipbreaker uses a projection near the insert nose to guide chips at shallow depths of cut. Select the grade and cutting data for your workpiece and cutting conditions.

How should I enter the quote quantity?

Enter the number of individual inserts required. Mitsubishi lists ten inserts per case, so a requirement for two cases is 20 inserts.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665