Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeChipbreakerWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
10560808 CCMT21.50.5LS / CCMT060202-LS CCMT21.50.5LSCCMT060202-LSMP9005LSHeat-resistant alloys6.352.380.26.452.88072Neutral10
10560815 CCMT21.51LS / CCMT060204-LS CCMT21.51LSCCMT060204-LSMP9005LSHeat-resistant alloys6.352.380.46.452.88072Neutral10
10560822 CCMT32.50.5LS / CCMT09T302-LS CCMT32.50.5LSCCMT09T302-LSMP9005LSHeat-resistant alloys9.5253.970.29.674.48072Neutral10
10560839 CCMT32.51LS / CCMT09T304-LS CCMT32.51LSCCMT09T304-LSMP9005LSHeat-resistant alloys9.5253.970.49.674.48072Neutral10
10560846 CCMT32.52LS / CCMT09T308-LS CCMT32.52LSCCMT09T308-LSMP9005LSHeat-resistant alloys9.5253.970.89.674.48072Neutral10

Technical documents

Compare With Similar Items

Product
Description

Use Mitsubishi CCMT-LS MP9005 inserts for light turning in heat-resistant alloys. Mitsubishi recommends MP9005 when wear resistance is the priority in finish to medium cuts. Each PVD-coated carbide insert has an 80° corner angle and 7° relief. Compare the inscribed circle, thickness and nose radius to match your holder. Quote quantities are individual inserts, with ten inserts per manufacturer case.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

CCMT-LS MP9005 is a positive, two-corner PVD-coated carbide insert for light turning in heat-resistant alloys. Mitsubishi recommends MP9005 when wear resistance is the priority in finish to medium cuts.

Choosing a configuration

These MP9005 sizes have inscribed-circle diameters of 6.35, 9.525 mm. Compare thickness and nose radius under the selected EDP. The chart lists both the ANSI and ISO designation for each geometry.

Compatibility and use

Match the full CCMT designation to the holder’s accepted insert size, included angle, positive relief and clamping system. A matching nose radius alone does not establish pocket fit.

Technical documents

The PDF table on page 13 identifies CCMT-LS insert sizes, grade availability and metric dimensions. Use the dimensional drawing with the selected chart row to identify the clamping hole and cutting dimensions.

What do the ANSI and ISO designations identify?

Each row lists both designations for the same MP9005 insert. Use the EDP on the selected row when requesting a quote.

When should I consider the LS chipbreaker?

Mitsubishi lists LS for light turning in heat-resistant alloys. Mitsubishi recommends MP9005 when wear resistance is the priority in finish to medium cuts.

How should I enter the quote quantity?

Enter the number of individual inserts required. Mitsubishi lists ten inserts per case, so a requirement for two cases is 20 inserts.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665