Mitsubishi Materials CCMT-MM MP7135 Turning Inserts
Mitsubishi Materials CCMT-MM MP7135 Turning Inserts
Use Mitsubishi CCMT-MM MP7135 inserts for medium turning in stainless steel. Mitsubishi specifies the tougher MP7135 carbide grade for interrupted stainless steel turning. Each PVD-coated carbide insert has an 80° corner angle and 7° relief. Compare the inscribed circle, thickness and nose radius to match your holder. Quote quantities are individual inserts, with ten inserts per manufacturer case.
Technical Specifications
Tool configurations
| Article ID | Configuration | ANSI designation | ISO designation | Grade | Chipbreaker | Workpiece material | Inscribed circle [mm] | Thickness [mm] | Nose radius [mm] | Cutting edge length [mm] | Mounting hole diameter [mm] | Included corner angle [°] | Relief angle [°] | Cutting corners | Hand | Inserts per case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 23853096 | CCMT21.50.5MM / CCMT060202-MM | CCMT21.50.5MM | CCMT060202-MM | MP7135 | MM | Stainless steel | 6.35 | 2.38 | 0.2 | 6.45 | 2.8 | 80 | 7 | 2 | Neutral | 10 |
| 23852785 | CCMT21.51MM / CCMT060204-MM | CCMT21.51MM | CCMT060204-MM | MP7135 | MM | Stainless steel | 6.35 | 2.38 | 0.4 | 6.45 | 2.8 | 80 | 7 | 2 | Neutral | 10 |
| 23852792 | CCMT21.52MM / CCMT060208-MM | CCMT21.52MM | CCMT060208-MM | MP7135 | MM | Stainless steel | 6.35 | 2.38 | 0.8 | 6.45 | 2.8 | 80 | 7 | 2 | Neutral | 10 |
| 23853133 | CCMT32.50.5MM / CCMT09T302-MM | CCMT32.50.5MM | CCMT09T302-MM | MP7135 | MM | Stainless steel | 9.525 | 3.97 | 0.2 | 9.67 | 4.4 | 80 | 7 | 2 | Neutral | 10 |
| 23852877 | CCMT32.51MM / CCMT09T304-MM | CCMT32.51MM | CCMT09T304-MM | MP7135 | MM | Stainless steel | 9.525 | 3.97 | 0.4 | 9.67 | 4.4 | 80 | 7 | 2 | Neutral | 10 |
| 23852884 | CCMT32.52MM / CCMT09T308-MM | CCMT32.52MM | CCMT09T308-MM | MP7135 | MM | Stainless steel | 9.525 | 3.97 | 0.8 | 9.67 | 4.4 | 80 | 7 | 2 | Neutral | 10 |
| 23852969 | CCMT431MM / CCMT120404-MM | CCMT431MM | CCMT120404-MM | MP7135 | MM | Stainless steel | 12.7 | 4.76 | 0.4 | 12.9 | 5.5 | 80 | 7 | 2 | Neutral | 10 |
| 23852976 | CCMT432MM / CCMT120408-MM | CCMT432MM | CCMT120408-MM | MP7135 | MM | Stainless steel | 12.7 | 4.76 | 0.8 | 12.9 | 5.5 | 80 | 7 | 2 | Neutral | 10 |
| 23852983 | CCMT433MM / CCMT120412-MM | CCMT433MM | CCMT120412-MM | MP7135 | MM | Stainless steel | 12.7 | 4.76 | 1.2 | 12.9 | 5.5 | 80 | 7 | 2 | Neutral | 10 |
Technical documents
Mitsubishi stainless steel turning guide — inch insert table
Mitsubishi stainless steel turning guide — inch insert table (PDF)
Compare With Similar Items
| Product | ||||||
|---|---|---|---|---|---|---|
| Description | Use Mitsubishi CCMT-MM MP7135 inserts for medium turning in stainless steel. Mitsubishi specifies the tougher MP7135 carbide grade for interrupted stainless steel turning. Each PVD-coated carbide insert has an 80° corner angle and 7° relief. Compare the inscribed circle, thickness and nose radius to match your holder. Quote quantities are individual inserts, with ten inserts per manufacturer case. |
These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius. |
| Price | Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Technical guidance & FAQs
Applications and materials
Choosing a configuration
Compatibility and use
Technical documents
What do the ANSI and ISO designations identify?
Each row lists both designations for the same MP7135 insert. Use the EDP on the selected row when requesting a quote.
When should I consider the MM chipbreaker?
Mitsubishi lists MM for medium turning in stainless steel. Mitsubishi specifies the tougher MP7135 carbide grade for interrupted stainless steel turning.
How should I enter the quote quantity?
Enter the number of individual inserts required. Mitsubishi lists ten inserts per case, so a requirement for two cases is 20 inserts.