Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeChipbreakerWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
23030237 CCMT21.50.5MP / CCMT060202-MP CCMT21.50.5MPCCMT060202-MPMC6125MPSteel6.352.380.26.452.88072Neutral10
23006492 CCMT21.51MP / CCMT060204-MP CCMT21.51MPCCMT060204-MPMC6125MPSteel6.352.380.46.452.88072Neutral10
23006508 CCMT21.52MP / CCMT060208-MP CCMT21.52MPCCMT060208-MPMC6125MPSteel6.352.380.86.452.88072Neutral10
23077904 CCMT2.520.5MP / CCMT080302-MP CCMT2.520.5MPCCMT080302-MPMC6125MPSteel7.943.180.28.063.48072Neutral10
23030459 CCMT32.50.5MP / CCMT09T302-MP CCMT32.50.5MPCCMT09T302-MPMC6125MPSteel9.5253.970.29.674.48072Neutral10
23006539 CCMT32.51MP / CCMT09T304-MP CCMT32.51MPCCMT09T304-MPMC6125MPSteel9.5253.970.49.674.48072Neutral10
23006546 CCMT32.52MP / CCMT09T308-MP CCMT32.52MPCCMT09T308-MPMC6125MPSteel9.5253.970.89.674.48072Neutral10
23006591 CCMT431MP / CCMT120404-MP CCMT431MPCCMT120404-MPMC6125MPSteel12.74.760.412.95.58072Neutral10
23006607 CCMT432MP / CCMT120408-MP CCMT432MPCCMT120408-MPMC6125MPSteel12.74.760.812.95.58072Neutral10

Technical documents

Compare With Similar Items

Product
Description

Compare Mitsubishi CCMT-MP MC6125 inserts for medium turning in steel. These 80° rhombic inserts have 7° relief and two cutting corners. Available nose radii range from 0.2 to 0.8 mm. Match the inscribed circle and thickness to your holder, then select the exact ANSI or ISO designation for a quote.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

CCMT-MP uses a positive 7° clearance angle and an MP chipbreaker for medium turning. Mitsubishi specifies this CVD-coated MC6100 grade for steel turning.

Choosing a configuration

The MC6125 configurations shown have inscribed-circle sizes of 6.35, 7.94, 9.525, 12.7 mm. Compare the chart for each size’s thickness and nose radius. The available corner radii in this group are 0.2, 0.4, 0.8 mm.

Compatibility and use

Match the full CCMT designation to the holder’s accepted insert size, included angle, positive relief and clamping system. A matching nose radius alone does not establish pocket fit.

Technical documents

See printed page 27 for CCMT-MP grade availability and metric insert dimensions. The dimension drawing identifies the inscribed circle, nose radius, relief angle and insert thickness.

What do the ANSI and ISO designations identify?

Each row gives both designations for the same MC6125 insert. Use the EDP on that row when ordering or requesting a quote.

How many cutting corners does a CCMT-MP insert provide?

The listed inserts have two cutting corners. Their neutral hand and 80° corner angle are recorded in the configuration chart.

How should I enter the quote quantity?

Enter the number of individual inserts required. Mitsubishi lists ten inserts per case, so a requirement for two cases is 20 inserts.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665