Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeChipbreakerWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
24320351 CCMT21.50.5MP / CCMT060202-MP CCMT21.50.5MPCCMT060202-MPMP3115MPSteel6.352.380.26.452.88072Neutral10
24320436 CCMT21.51MP / CCMT060204-MP CCMT21.51MPCCMT060204-MPMP3115MPSteel6.352.380.46.452.88072Neutral10
24320535 CCMT32.50.5MP / CCMT09T302-MP CCMT32.50.5MPCCMT09T302-MPMP3115MPSteel9.5253.970.29.674.48072Neutral10
24320610 CCMT32.51MP / CCMT09T304-MP CCMT32.51MPCCMT09T304-MPMP3115MPSteel9.5253.970.49.674.48072Neutral10
24320719 CCMT32.52MP / CCMT09T308-MP CCMT32.52MPCCMT09T308-MPMP3115MPSteel9.5253.970.89.674.48072Neutral10
24320757 CCMT431MP / CCMT120404-MP CCMT431MPCCMT120404-MPMP3115MPSteel12.74.760.412.95.58072Neutral10
24320771 CCMT432MP / CCMT120408-MP CCMT432MPCCMT120408-MPMP3115MPSteel12.74.760.812.95.58072Neutral10
24320801 CCMT433MP / CCMT120412-MP CCMT433MPCCMT120412-MPMP3115MPSteel12.74.761.212.95.58072Neutral10

Technical documents

Compare With Similar Items

Product
Description

Compare Mitsubishi CCMT-MP MP3115 inserts for medium turning in steel. These 80° rhombic inserts have 7° relief and two cutting corners. Available nose radii range from 0.2 to 1.2 mm. Match the inscribed circle and thickness to your holder, then select the exact ANSI or ISO designation for a quote.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

CCMT-MP uses a positive 7° clearance angle and an MP chipbreaker for medium turning. Mitsubishi specifies MP3115 as a PVD-coated cermet for steel turning, including carbon, alloy and mild steels.

Choosing a configuration

The MP3115 configurations shown have inscribed-circle sizes of 6.35, 9.525, 12.7 mm. Compare the chart for each size’s thickness and nose radius. The available corner radii in this group are 0.2, 0.4, 0.8, 1.2 mm.

Compatibility and use

Match the full CCMT designation to the holder’s accepted insert size, included angle, positive relief and clamping system. A matching nose radius alone does not establish pocket fit.

Technical documents

See page 10 for CCMT-MP dimensions and grade availability. Page 7 covers the MP chipbreaker for medium turning in mild, carbon and alloy steel. The dimension drawing identifies the inscribed circle, nose radius, relief angle and insert thickness.

What do the ANSI and ISO designations identify?

Each row gives both designations for the same MP3115 insert. Use the EDP on that row when ordering or requesting a quote.

How many cutting corners does a CCMT-MP insert provide?

The listed inserts have two cutting corners. Their neutral hand and 80° corner angle are recorded in the configuration chart.

How should I enter the quote quantity?

Enter the number of individual inserts required. Mitsubishi lists ten inserts per case, so a requirement for two cases is 20 inserts.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665