Mitsubishi Materials CNMG-MS US735 Turning Inserts
Mitsubishi Materials CNMG-MS US735 Turning Inserts
These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.
Technical Specifications
Tool configurations
| Article ID | Configuration | ANSI designation | ISO designation | Grade | Cutting geometry | Workpiece material | Inscribed circle [mm] | Thickness [mm] | Nose radius [mm] | Cutting edge length [mm] | Mounting hole diameter [mm] | Included corner angle [°] | Relief angle [°] | Cutting corners | Hand | Inserts per case | Compatible DCLN holders |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 112044 | CNMG321MS / CNMG090304-MS | CNMG321MS | CNMG090304-MS | US735 | MS | Stainless steel | 9.525 | 3.18 | 0.4 | 9.67 | 3.81 | 80 | 0 | 4 | Neutral | 10 | DCLNR-123 (371080), DCLNL-163 (371354), DCLNR-163 (371362) |
| 112048 | CNMG322MS / CNMG090308-MS | CNMG322MS | CNMG090308-MS | US735 | MS | Stainless steel | 9.525 | 3.18 | 0.8 | 9.67 | 3.81 | 80 | 0 | 4 | Neutral | 10 | DCLNR-123 (371080), DCLNL-163 (371354), DCLNR-163 (371362) |
Technical documents
Compare With Similar Items
| Product | ||||||
|---|---|---|---|---|---|---|
| Description | These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius. |
These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
Use these 80° CNMG-MS inserts for medium turning in heat-resistant alloys. Choose MP9025 when interrupted cutting calls for greater edge stability. Both sizes fit the DCLN 32 pocket and have a 3/8 in. inscribed circle. Choose the 0.4 mm or 0.8 mm nose radius by EDP. |
| Price | Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Technical guidance & FAQs
Applications and materials
Choosing a configuration
Compatibility and use
Technical documents
Which nose radius should I specify?
CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.
Which holders take this insert?
Mitsubishi matches these order codes to the DCLNR-123, DCLNL-163 and DCLNR-163 holders. A similar-looking CNMG pocket can use a different inscribed circle or thickness.
How many inserts make up one case?
Mitsubishi supplies a case of 10 inserts. Enter 10 on the quote for one case, or 20 for two.