Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeCutting geometryWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
23932821 DCET21.5V3LSRF / DCET0702V3L-SRF DCET21.5V3LSRFDCET0702V3L-SRFMT9005L-SRFheat-resistant alloys and titanium alloys6.352.380.037.752.85572Left10
23932906 DCET32.5V3LSRF / DCET11T3V3L-SRF DCET32.5V3LSRFDCET11T3V3L-SRFMT9005L-SRFheat-resistant alloys and titanium alloys9.5253.970.0311.634.45572Left10

Technical documents

Compare With Similar Items

Product
Description

These left-hand DCET inserts have the L-SRF geometry and MT9005 grade. Mitsubishi lists this grade for heat-resistant alloys and titanium alloys. Match the 55° rhombic insert to your holder by inscribed circle, thickness and mounting hole diameter, then select the corner radius by EDP.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies MT9005 in the L-SRF geometry for heat-resistant alloys and titanium alloys. These left-hand inserts have a 55° corner and 7° relief.

Choosing a configuration

The listed configurations have an inscribed circle of 6.35–9.525 mm, a thickness of 2.38–3.97 mm and a nose radius of 0.03 mm. Read the dimensions on the row for the exact EDP.

Compatibility and use

Match the DCET designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The mounting hole, inscribed circle, thickness and corner radius are listed in millimeters.

Technical documents

The Mitsubishi U.S. Positive Inserts guide lists the exact ANSI and ISO configurations, MT9005 grade and corner radii on printed page 28. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for DCET-L-SRF in MT9005?

Mitsubishi identifies the configurations shown as left-hand. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this MT9005 group are 0.03 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665