Mitsubishi Materials DCET-R-SN MP9025 Turning Inserts
Mitsubishi Materials DCET-R-SN MP9025 Turning Inserts
These right-hand DCET inserts have the R-SN geometry and MP9025 grade. Mitsubishi lists this grade for heat-resistant alloys and titanium alloys. Match the 55° rhombic insert to your holder by inscribed circle, thickness and mounting hole diameter, then select the corner radius by EDP.
Technical Specifications
Tool configurations
| Article ID | Configuration | ANSI designation | ISO designation | Grade | Cutting geometry | Workpiece material | Inscribed circle [mm] | Thickness [mm] | Nose radius [mm] | Cutting edge length [mm] | Mounting hole diameter [mm] | Included corner angle [°] | Relief angle [°] | Cutting corners | Hand | Inserts per case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 23988941 | DCET21.5V3RSN / DCET0702V3R-SN | DCET21.5V3RSN | DCET0702V3R-SN | MP9025 | R-SN | heat-resistant alloys and titanium alloys | 6.35 | 2.38 | 0.03 | 7.75 | 2.8 | 55 | 7 | 2 | Right | 10 |
| 23989108 | DCET32.5V3RSN / DCET11T3V3R-SN | DCET32.5V3RSN | DCET11T3V3R-SN | MP9025 | R-SN | heat-resistant alloys and titanium alloys | 9.525 | 3.97 | 0.03 | 11.63 | 4.4 | 55 | 7 | 2 | Right | 10 |
Technical documents
Compare With Similar Items
| Product | ||||||
|---|---|---|---|---|---|---|
| Description | These right-hand DCET inserts have the R-SN geometry and MP9025 grade. Mitsubishi lists this grade for heat-resistant alloys and titanium alloys. Match the 55° rhombic insert to your holder by inscribed circle, thickness and mounting hole diameter, then select the corner radius by EDP. |
These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius. |
| Price | Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Technical guidance & FAQs
Applications and materials
Choosing a configuration
Compatibility and use
Technical documents
Which hand is listed for DCET-R-SN in MP9025?
Mitsubishi identifies the configurations shown as right-hand. Check the hand and the complete order number against the holder specification.
Which dimension controls the nose radius?
RE is the nose radius. The values shown for this MP9025 group are 0.03 mm. Use the exact EDP row when selecting a replacement.
How many inserts are in two cases?
Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.