Mitsubishi Materials DCMT-FV MC6115 Turning Inserts
Mitsubishi Materials DCMT-FV MC6115 Turning Inserts
Mitsubishi lists DCMT-FV in MC6115 for finish turning in steel. The rhombic insert has a 55° included angle and 7° relief. The configurations shown have an inscribed circle of 9.525 mm and a nose radius of 0.4 mm. Select the EDP that matches your holder and quote in individual inserts.
Technical Specifications
Tool configurations
| Article ID | Configuration | ANSI designation | ISO designation | Grade | Chipbreaker | Workpiece material | Inscribed circle [mm] | Thickness [mm] | Nose radius [mm] | Cutting edge length [mm] | Mounting hole diameter [mm] | Included corner angle [°] | Relief angle [°] | Cutting corners | Hand | Inserts per case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 23032446 | DCMT32.51FV / DCMT11T304-FV | DCMT32.51FV | DCMT11T304-FV | MC6115 | FV | Steel | 9.525 | 3.97 | 0.4 | 11.63 | 4.4 | 55 | 7 | 2 | Neutral | 10 |
Technical documents
Compare With Similar Items
| Product | ||||||
|---|---|---|---|---|---|---|
| Description | Mitsubishi lists DCMT-FV in MC6115 for finish turning in steel. The rhombic insert has a 55° included angle and 7° relief. The configurations shown have an inscribed circle of 9.525 mm and a nose radius of 0.4 mm. Select the EDP that matches your holder and quote in individual inserts. |
These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder. |
These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius. |
| Price | Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Pricing by quote
|
Technical guidance & FAQs
Applications and materials
Choosing a configuration
Compatibility and use
Technical documents
Which DCMT-FV size should I quote?
Choose the EDP for the exact ANSI or ISO designation and grade listed for your holder. The chart gives a separate row for each configuration.
What nose radii are shown?
The MC6115 configurations shown have a nose radius of 0.4 mm. Read the RE value for the exact EDP.
What quantity should I enter for two cases?
Enter 20 individual inserts. Mitsubishi lists ten inserts per case for these EDPs.