Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeCutting geometryWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
692529 DCMT21.51LP / DCMT070204-LP DCMT21.51LPDCMT070204-LPNX2525LPsteel, stainless steel, cast iron6.352.380.47.752.85572Neutral10
692537 DCMT21.52LP / DCMT070208-LP DCMT21.52LPDCMT070208-LPNX2525LPsteel, stainless steel, cast iron6.352.380.87.752.85572Neutral10
692553 DCMT32.52LP / DCMT11T308-LP DCMT32.52LPDCMT11T308-LPNX2525LPsteel, stainless steel, cast iron9.5253.970.811.634.45572Neutral10

Technical documents

Compare With Similar Items

Product
Description

These neutral DCMT inserts have the LP geometry and NX2525 grade. Mitsubishi lists this grade for steel, stainless steel, cast iron. Match the 55° rhombic insert to your holder by inscribed circle, thickness and mounting hole diameter, then select the corner radius by EDP.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies NX2525 in the LP geometry for steel, stainless steel, cast iron. These neutral inserts have a 55° corner and 7° relief.

Choosing a configuration

The listed configurations have an inscribed circle of 6.35–9.525 mm, a thickness of 2.38–3.97 mm and a nose radius of 0.4–0.8 mm. Read the dimensions on the row for the exact EDP.

Compatibility and use

Match the DCMT designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The mounting hole, inscribed circle, thickness and corner radius are listed in millimeters.

Technical documents

The Mitsubishi U.S. Positive Inserts guide lists the exact ANSI and ISO configurations, NX2525 grade and corner radii on printed page 28. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for DCMT-LP in NX2525?

Mitsubishi identifies the configurations shown as neutral. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this NX2525 group are 0.4–0.8 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665