Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeCutting geometryWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
23865082 SNMG431LM / SNMG120404-LM SNMG431LMSNMG120404-LMMP7135LMstainless steel12.74.760.412.75.169008Neutral10
23865105 SNMG432LM / SNMG120408-LM SNMG432LMSNMG120408-LMMP7135LMstainless steel12.74.760.812.75.169008Neutral10

Technical documents

Compare With Similar Items

Product
Description

Mitsubishi SNMG-LM inserts pair the LM chipbreaker with grade MP7135 for light cuts in stainless steel. The square insert has a 90° corner and 0° relief. Compare the inscribed circle, thickness and corner radius in the chart to select the exact EDP.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies MP7135 in the LM geometry for stainless steel. These neutral inserts have a 90° corner and 0° relief. Mitsubishi’s chipbreaker guide places LM in MP7135 under unstable conditions such as an interrupted cut or a varying depth of cut.

Choosing a configuration

The listed configurations have an inscribed circle of 12.7 mm, a thickness of 4.76 mm and a nose radius of 0.4–0.8 mm. Read the dimensions on the row for the exact EDP.

Compatibility and use

Match the SNMG designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The mounting hole, inscribed circle, thickness and corner radius are listed in millimeters.

Technical documents

Mitsubishi’s MC/MP7100 guide lists the ISO order codes and MP7135 geometry on page 12. Compare IC, thickness, corner radius and mounting hole diameter for the selected configuration. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for SNMG-LM in MP7135?

Mitsubishi identifies the configurations shown as neutral. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this MP7135 group are 0.4–0.8 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665