Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeCutting geometryWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
23989450 TPEH1.51.5V3LSR / TPEH0802V3L-SR TPEH1.51.5V3LSRTPEH0802V3L-SRMP9025L-SRheat-resistant alloys and titanium alloys4.762.380.038.242.460113Left10
23989573 TPEH22V3LSR / TPEH1103V3L-SR TPEH22V3LSRTPEH1103V3L-SRMP9025L-SRheat-resistant alloys and titanium alloys6.353.180.03113.460113Left10

Technical documents

Compare With Similar Items

Product
Description

These left-hand TPEH inserts have the L-SR geometry and MP9025 grade. Mitsubishi lists this grade for heat-resistant alloys and titanium alloys. Match the 60° triangular insert to your holder by inscribed circle, thickness and mounting hole diameter, then select the corner radius by EDP.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies MP9025 in the L-SR geometry for heat-resistant alloys and titanium alloys. These left-hand inserts have a 60° corner and 11° relief.

Choosing a configuration

The listed configurations have an inscribed circle of 4.76–6.35 mm, a thickness of 2.38–3.18 mm and a nose radius of 0.03 mm. Read the dimensions on the row for the exact EDP.

Compatibility and use

Match the TPEH designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The mounting hole, inscribed circle, thickness and corner radius are listed in millimeters.

Technical documents

The Mitsubishi U.S. Positive Inserts guide lists the exact ANSI and ISO configurations, MP9025 grade and corner radii on printed page 43. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for TPEH-L-SR in MP9025?

Mitsubishi identifies the configurations shown as left-hand. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this MP9025 group are 0.03 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665