Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeChipbreakerWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
23845343 VBMT331MM / VBMT160404-MM VBMT331MMVBMT160404-MMMC7115MMStainless steel9.5254.760.416.614.43552Neutral10
23845404 VBMT332MM / VBMT160408-MM VBMT332MMVBMT160408-MMMC7115MMStainless steel9.5254.760.816.614.43552Neutral10

Technical documents

Compare With Similar Items

Product
Description

Mitsubishi lists VBMT-MM in MC7115 for medium turning in stainless steel. The rhombic insert has a 35° included angle and 5° relief. The configurations shown have an inscribed circle of 9.525 mm and a nose radius of 0.4–0.8 mm. Select the EDP that matches your holder and quote in individual inserts.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Mitsubishi lists the MM chipbreaker and MC7115 grade for medium turning in stainless steel. The rhombic insert provides two cutting corners.

Choosing a configuration

The configurations shown have an inscribed circle of 9.525 mm and a nose radius of 0.4–0.8 mm. Check IC, thickness and hole diameter in the chart against the insert designation specified for the toolholder.

Compatibility and use

Use a holder that specifies the selected VBMT size and clamping system. Verify the 35° included angle, 5° relief and exact seat dimensions before requesting a substitute.

Technical documents

The manufacturer table on PDF page 19 lists VBMT-MM insert dimensions and MC7115 availability. The drawing identifies the symbols used in the configuration chart.

Which VBMT-MM size should I quote?

Choose the EDP for the exact ANSI or ISO designation and grade listed for your holder. The chart gives a separate row for each configuration.

What nose radii are shown?

The MC7115 configurations shown have a nose radius of 0.4–0.8 mm. Read the RE value for the exact EDP.

What quantity should I enter for two cases?

Enter 20 individual inserts. Mitsubishi lists ten inserts per case for these EDPs.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665