Skip to content

Technical Specifications

Tool configurations

Select a configuration to review it above.

Article IDConfigurationANSI designationISO designationGradeCutting geometryWorkpiece materialInscribed circle [mm]Thickness [mm]Nose radius [mm]Cutting edge length [mm]Mounting hole diameter [mm]Included corner angle [°]Relief angle [°]Cutting cornersHandInserts per case
23862012 WNMG331LM / WNMG060404-LM WNMG331LMWNMG060404-LMMC7125LMstainless steel9.5254.760.46.523.818006Neutral10
23862081 WNMG332LM / WNMG060408-LM WNMG332LMWNMG060408-LMMC7125LMstainless steel9.5254.760.86.523.818006Neutral10

Technical documents

Compare With Similar Items

Product
Description

Mitsubishi WNMG-LM inserts pair the LM chipbreaker with grade MC7125 for light cuts in stainless steel. The trigon insert has a 80° corner and 0° relief. Compare the inscribed circle, thickness and corner radius in the chart to select the exact EDP.

These right-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MX3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These right-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These left-hand TNGG-F inserts finish steel with a MP3115 cermet cutting edge. Each triangular insert has six cutting corners, a 9.525 mm inscribed circle and a 3.81 mm mounting hole. Select the EDP by nose radius and check the hand against your holder.

These neutral, 80° CNMG-MS inserts fit DCLN 32 turning-tool pockets. Mitsubishi lists grade US735 for stainless steel. CNMG321MS has a 0.4 mm nose radius and CNMG322MS has a 0.8 mm nose radius.

Price
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote
Pricing by quote

Technical guidance & FAQs

Applications and materials

Mitsubishi specifies MC7125 in the LM geometry for stainless steel. These neutral inserts have a 80° corner and 0° relief. Mitsubishi’s chipbreaker guide places LM in MC7125 under general cutting conditions.

Choosing a configuration

The listed configurations have an inscribed circle of 9.525 mm, a thickness of 4.76 mm and a nose radius of 0.4–0.8 mm. Read the dimensions on the row for the exact EDP.

Compatibility and use

Match the WNMG designation and hand to the holder specifications. Check seat angle, insert thickness and clamping hole diameter. The mounting hole, inscribed circle, thickness and corner radius are listed in millimeters.

Technical documents

Mitsubishi’s MC/MP7100 guide lists the ISO order codes and MC7125 geometry on page 15. Compare IC, thickness, corner radius and mounting hole diameter for the selected configuration. The dimensional drawing identifies the mounting hole, inscribed circle and cutting edge.

Which hand is listed for WNMG-LM in MC7125?

Mitsubishi identifies the configurations shown as neutral. Check the hand and the complete order number against the holder specification.

Which dimension controls the nose radius?

RE is the nose radius. The values shown for this MC7125 group are 0.4–0.8 mm. Use the exact EDP row when selecting a replacement.

How many inserts are in two cases?

Two manufacturer cases contain 20 inserts. Enter 20 as the individual insert quantity in the quote drawer.

Let our team help

We’ll confirm availability, pricing, and the next step for your item.

Call 866-944-8665