Dosatron Mixer 1–10% Volumetric Coolant Mixer

Plant-Wide Consistency
The volumetric piston helps maintain a fixed 1% to 10% mix ratio despite facility water-pressure fluctuations, including changes during wash-downs or shift transitions.

Infrastructure Ready
Operates without electricity for straightforward installation in wet environments or other locations where electrical infrastructure may be impractical.

EHS & Compliance
Helps eliminate manual mixing and open buckets, reducing potential exposure to concentrate, spills, and slip hazards on the production floor.

High-ROI Efficiency
Helps prevent over-concentrated mixes and unnecessary coolant waste. Moving from manual mixing to volumetric dosing can materially reduce concentrate consumption.

• Model: D14MZ10 (Industrial Series)
• Dosing Range: 1% – 10% (1:100 – 1:10)
• Flow Rate (Single Unit): 14 GPM (Gallons Per Minute)
• Scalability: Parallel Installation Capable (Install 2+ units in parallel for 28+, 42+, or 100+ GPM central systems)
• Operating Pressure: 7 – 85 PSI
• Housing: Chemical-Resistant Polypropylene
• Connection: 3/4" NPT (Standard Industrial Fitting)

Immunity to Pressure Drop
In large facilities, water pressure is rarely constant. When a nearby machine fills or a toilet flushes, line pressure drops. Venturi mixers rely on velocity, so when pressure drops, they stop pulling concentrate, leading to lean coolant and rusted parts.

The Dosatron Solution
The D14MZ10 is a hydraulic engine. It does not care about pressure; it cares about volume. If water moves, the piston moves. This ensures that whether you are filling a single sump or topping off a 1,000-gallon central tank, the concentration is chemically perfect every time.